User manual ASK PROXIMA DP9260

[. . . ] Desktop Projector 9260 Desktop Projector 9240 English English Deutsch Français Italiano Español USA GB D F I E s s s s s s PRESENTATIONS WORKING SESSIONS TRAINING MULTIMEDIA ANIMATION VIDEO INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the User's Guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. TO THE OWNER USA As the owner of a Desktop Projector 9260/9240, you are probably eager to try out your new projector. [. . . ] To increase the level, point the arrow to v and then press the SELECT BUTTON. To decrease the level, point the arrow to w and then press the SELECT BUTTON. You may want to store the settings in the memory so that you can recall them later. To store the settings, move the arrow to Stored and then press the SELECT BUTTON. When you have stored the settings, "OK ?" is displayed for confirmation. The stored settings are memorized even if the MAIN ON/OFF is switched off. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON. 10. If you do not want to store the settings, move the arrow to Quit and then press the SELECT BUTTON. The settings changed remains effective until the MAIN ON/OFF switch is turned off. 11. To recall the settings from the memory that you have stored, move the arrow to Reset and then press the SELECT BUTTON. When you have reset the settings, "OK ?" is displayed for confirmation. NOTE : "TINT" will be skipped in the PAL, SECAM, PAL-M and PAL-N mode. MAIN MENU DISPLAY USA IMAGE ADJUST DISPLAY TABLE OF PICTURE IMAGE ADJUSTMENT COLOR TINT WHITE BALANCE (R/G/B) CONTRAST BRIGHTNESS SHARPNESS DECREASES MORE PURPLE DECREASES LIGHTER DARKER SOFTER 0 0 0 0 0 0 63 INCREASES 63 MORE GREEN 63 INCREASES 63 DEEPER 63 BRIGHTER 31 SHARPER 34 VIDEO MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. WIDE function This projector is able to project not only a normal video image (with 4 x 3 aspect ratio), but also a wider video image by compressing 4 x 3 image. This feature enable you to enjoy watching pictures like cinema images. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. Press the POINT LEFT/RIGHT BUTTON(s) to select SCREEN and press the SELECT BUTTON. To switch to "Wide" mode, move the arrow to Wide by pressing the POINT UP/DOWN BUTTON(s) and then press the SELECT BUTTON. To switch to "Regular" mode, move the arrow to Regular by pressing the POINT UP/DOWN BUTTON(s) and then press the SELECT BUTTON. When the image is distorted vertically, move the arrow to Keystone by pressing POINT UP/DOWN BUTTON(s) and then press SELECT BUTTON. Press the POINT UP BUTTON to reduce the upper part of the image, and the POINT DOWN BUTTON to reduce the lower part. Press the NORMAL BUTTON in keystone mode, the image changed to original image (not correct keystone distortion). [. . . ] q Make sure nothing is blocking between the remote control sensor and remote control unit. q Make sure you are not too far from the projector when using the remote control unit. q Check the ALL-OFF switch on the Remote Control Unit is set to "ON". q Turn on the projector before you turn on the computer. Wireless mouse function does not work. Where to Get Help : If you still need help after checking the table above, you should call your dealer's technical support line and explain your problem. [. . . ]