User manual ASK PROXIMA DP4100

[. . . ] Proxima Desktop Projector 4100/4200 User's Guide (not actual cover) Warranty Proxima Corporation warrants that the Proxima® Desktop ProjectorTM product manufactured by Proxima is free from defects in materials and workmanship under normal use during the Warranty Period. Each Proxima product is manufactured from new parts, or new and some used parts. In some cases, the product may have been delivered to another end-user and then returned. In all cases, the product has undergone testing and quality inspection, and Proxima's full warranty terms apply. [. . . ] The projector will beep twice when the command is acknowledged. MENU SOURCE SETUP PROG1 PROG2/ Displays or hides the menu. If the MediaExpress system is installed and selected as the source, this becomes the MediaExpress key. Using the Desktop ProjectorTM 4100/4200 3-11 KEY FUNCTION Pressing the center of the large round button sends a mouse click signal. Press the edges up, down, left or right to move the cursor around the screen. To drag an object, position the cursor over it, then press the center button for one second. Move the cursor to the new location, and press the center button again to release it. Pressing the right side of the button moves a MediaExpress presentation forward one slide. Pressing the left side of the button moves a MediaExpress presentation back one slide. Press the bottom of the button again to restart the presentation. Cyclops Quick Remote The Cyclops Quick Remote allows you to control the most often used projector functions. NOTE: Several of the remote control functions require the installation of Proxima's Cyclops F/X software (see Chapter 4). KEY FUNCTION Moves a presentation (PowerPoint, Freehand, etc. ) forward or back one frame. Preview Allows you to preview an image from a presentation (PowerPoint, Persuasion, etc. ) if Cyclops F/X and a separate monitor are installed. Refer to the See It/Show It feature in Chapter 4 for more information. Selects a pre-programmed projector feature that you can choose from the Preferences menu (see page 3-27). Switches between connected sources. Select Source OPERATING THE PROJECTOR The DP4100/4200 is simple to control using the control panel, Cyclops remotes or pointer, or your computer mouse. 3-12 Chapter Three Using the Control Panel and Cyclops Remote Controls The control panel and Cyclops remote controls provide access to all of the projector's features. Simply press a key to select a function or to navigate through the menus. The remote controls can also be used to control the Cyclops F/X software (see Chapter 4). Using a Microsoft-Compatible Mouse You can use a Microsoft-compatible mouse to control the menus and the LightBoard® tool in Local Mode. The mouse must be connected to the AUX port on the projector before powering up the projector (see page 2-13). Operating Modes The DP4100/4200 can operate in Local or Host Mode. Local Mode Any time you activate the projector's menus or the LightBoard tool, the projector is in Local Mode. In Local Mode, the mouse or Cyclops remotes can be used for projector menu and LightBoard functions only; they do not communicate with the computer. In Local Mode, the projector mouse, Cyclops remotes or Cyclops pointer can be used to: · Move through the projector menus. · Control the LightBoard cursor. Host Mode If a data cable is connected between the projector and the computer, the projector can operate in Host Mode. In Host Mode, a mouse connected to the projector functions as the system mouse. It communicates with the computer or the MediaExpress system and controls the screen cursor for all computer and MediaExpress functions. Host Mode can only be used when the projector's menu and the LightBoard tool are not active. Please refer to the Cyclops User's Guide for more information on using a mouse with Cyclops. Using the Desktop ProjectorTM 4100/4200 3-13 THE GRAPHICAL USER INTERFACE Your DP4100/4200 features a graphical user interface that makes it easy to control all of the projector's functions. [. . . ] Wet it with lens cleaning fluid or denatured alcohol, and gently move it over the lens surface. 2 Take a part of the lens tissue that you haven't touched, and repeat the process, going over the lens in another direction. CAUTION!Protect it from potential fluid spills. CHANGING REMOTE CONTROL BATTERIES To install or change the two AAA alkaline batteries in the remote control unit: 1 Locate the battery compartment at the lower rear of the case. Make sure to align the batteries in the proper orientation (see Figure 5-4). [. . . ]