User manual ASK PROXIMA C200

[. . . ] English Declaration of Conformity Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070 USA European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands We declare under our sole responsibility that the C200 projector conforms to the following directives and norms: EMC Directive 89/336/EEC, Amended by 93/68/EEC EMC: EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC Safety: EN 60950: 2000 July, 2002 Safety Certifications UL, CUL, TÜV, GOST, CCC Remote Control Warning Laser radiation class II product; wavelength 650nm; maximum output 1mW. Remote control complies with applicable requirements of 21 CFR 1040. 10 and 1040. 11. Remote control complies with applicable requirements of EN 60 825-1: 1994 +A11. Trademarks Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. [. . . ] You can select from Blank, Mute, Aspect Ratio, Source, Auto Image, Freeze, Zoom, and About. This is useful if you want to make changes on your computer without your audience seeing them. The Blank button on the remote allows you to display a blank screen instead of the active source. The Startup Logo menu option lets you change the default startup screen to a black, white, or blue screen. Two menu options, Power Save and Screen Save, are provided to automatically shut down the projector after several minutes of inactivity or display a black screen. A Low Power menu option is also available to help lower the projector's fan sound volume. See page 33. · · · · · · · · 27 Optimizing video images After the video device is connected properly and the image is on the screen, you can optimize the image using the onscreen menus. · · Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture menu. Select a listed value, or select User and individually adjust the intensity of the red, green, and blue color. See page 32. Customizing the projector You can customize the projector for your specific setup and needs. · · · · · · · · For rear projection, turn Rear mode on in the Settings>System menu. For ceiling mounted projection, turn Ceiling mode on in the Settings>System menu. Specify which source the projector checks first for active video during power-up. Specify the menu language. · · · · 28 Using the menus Dot To open the menus, press the menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed. ) The Main menu appears. Use the arrow buttons to move up and down to highlight the desired submenu, then press the Select button. To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value, select an option using radio buttons, or turn the feature on or off using check boxes. When your adjustments are complete, navigate to Exit, then press Select to go to the previous menu; press the Menu button at any time to close the menus. The number of dots indicate the menu's level, ranging from one (the Main menu) to four (the most nested menus). The menus are grouped by usage: · · · The Picture menu provides image adjustments. The Settings menu provides set-up type adjustments that are not changed often. The About menu provides a read-only display of information about the projector and source. Menu button Main menu Keypad navigation buttons Picture menu Dots Settings menu Certain menu items may be hidden until a particular source is connected. [. . . ] THIS WARRANTY EXTENDS ONLY TO PRODUCTS PURCHASED FROM INFOCUS OR AN INFOCUS AUTHORIZED RESELLER. InFocus shall have no further obligation under the foregoing Limited Warranty if the Product has been damaged due to abuse, misuse, neglect, smoke exposure (cigarette or otherwise), accident, unusual physical or electrical stress, unauthorized modifications (including use of an unauthorized mount), tampering, alterations, or service other than by InFocus or its authorized agents, causes other than from ordinary use or failure to properly use the Product in the application for which said Product was intended. This Warranty excludes Product or accessory cleaning, repair, or replacement of plastics due to cosmetic damage and damage as a result of normal wear. Product repair outside of the terms of the Limited Warranty will be on a time and materials basis. [. . . ]