User manual ASK PROXIMA C175

[. . . ] >>>>>>> C175 C185 User's Guide Declaration of Conformity Manufacturer: InFocus Corporation, 27700B SW Parkway Avenue, Wilsonville, Oregon 97070 USA European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 89/336/EEC, Amended by 93/68/EEC EMC: EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC Safety: IEC 60950-1: 1st Edition May, 2004 Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Agency Approvals UL, CUL, TUV Other specific Country Approvals may apply, please see product certification label. This user's guide applies to models IN32, C175, W320, IN34, C185, W340 InFocus reserves the right to alter product offerings and specifications at any time. Trademarks Microsoft, PowerPoint, Word, Excel and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. [. . . ] For ceiling mounted projection, turn Ceiling mode on in the Settings>System menu. Specify which source the projector checks first for active video during power-up. · · · · · · · · Presentation features Several features are provided to make giving presentations easier. The following is an overview, details are found in the menu section on page 24. · · · The Custom key, available on several optional remotes only, allows you to assign various features to the button. The Startup Logo menu option lets you change the default startup screen to a black, white, or blue screen. Two menu options, Power Save and Screen Save, are provided to automatically shut down the projector after several minutes of inactivity or display a blank screen. See page 29. Optimizing video images After the video device is connected properly and the image is on the screen, you can optimize the image using the onscreen menus. For general information on using the menus, see page 24. 23 Using the menus To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed. ) The Main menu appears. Use the arrow buttons to move up and down to highlight the desired submenu, then press the Select button. To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value, select an option using radio buttons, or turn the feature on or off using check boxes. When your adjustments are complete, navigate to Exit, then press Select to go to the previous menu; press the Menu button at any time to close the menus. The number of dots indicate the menu's level, ranging from one (the Main menu) to four (the most nested menus). The menus are grouped by usage: · · · The Picture menu provides image adjustments. The Settings menu provides set-up type adjustments that are not changed often. The Source Info menu provides a read-only display of information about the projector and source. Picture menu Settings menu Main menu Menu button Keypad navigation buttons Dots Certain menu items may be grayed out until a particular source is connected. For example, Sharpness is only available for video sources and will be hidden when a computer source is active. For example, Brightness is grayed out until an image is active. Source Info menu 24 Picture menu To adjust the following six settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press select to confirm the changes. increasing keystone decreasing keystone Keystone: adjusts the image vertically and makes a squarer image. Contrast: controls the degree of difference between the lightest and darkest parts of the picture and changes the amount of black and white in the image. Color: (video and component sources only) adjusts a video image from black and white to fully saturated color. Tint: (NTSC video sources only) adjusts the red-green color balance in the image. Aspect Ratio: Aspect ratio is the ratio of the image width to image height. [. . . ] Twenty hours before the specified end of the lamp's life, the message "Replace lamp" briefly appears on the screen at each startup. When the expected lamp life has been reached, the Lamp indicator icon lights red (page 12). NOTE: You can order new lamp housings from www. infocus. com (in select areas), your retailer or your dealer. Use only a replacement lamp with the same type and rating as the original lamp. Service Info menu turn off and unplug the projector 1 Turn off the projector and unplug the power cable. [. . . ]