User manual ARTEC T3A PRO

[. . . ] This user manual and the content herein are protected under the intellectual property law. No part of this document may be copied, transmitted, reproduced, stored in any retrieval systems, or translated into any languages or computer languages in any form or by any means, electronic, mechanical, magnetic, optical, chemical, hand-copy or otherwise, without the prior written consent of the manufacturer. All other products, trademarks and trade names mentioned herein are the properties of their respective owners. Please read carefully the following compliance statement before using this product. [. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Check the following items from the list to make sure that all accessories are included, and no damage or loss found. Features Input Terminal: Female 75 Ohm F-Type Connector Receiving Frequency: 57 ~ 861 MHz RF Channel: 2~69 Bandwidth: 6 MHZ Demodulator 8VSB Video Processing MPEG-2 Video Decoding (MP@ML, MP@HL) Input Format: Supports 18 Modes (1080p/1080i/720p/480p/480i) Output Format: NTSC 720x480i Composite Video out Audio Processing Dolby AC-3 Audio Decoding Digital Multi-Lingual Closed Caption Digital CC (Comply with EIA-708-B), English/Spanish/ French EPG Current program display by transparent graphic plane Power Input Voltage: 12V DC Power Consumption: 4. Power key Infrared receiver Power LED RF IN RF OUT CH 3/4 DATA PORT AV OUT (VIDEO / AUDIO-L / AUDIO-R) To be connected to the power adapter 10 DC IN 2 3 4 5 6 7 8 9 Descriptions Changes channels, Adjusts the volume levels, Browses, Press direction keys on the box at the same time to display the OSD menu, Press direction keys on the box at the same time to confirm Power ON / OFF Receives signals from the remote control LED lights when the power on To be connected to the antenna To be connected to the RF IN on the TV Toggles between the CH3 and CH4 Factory maintenance use To be connected to TV audio, Video input jack Open the battery cover by using the button on the back of the remote control. Select RF cable connection or AV cable (with RCA connector) connection connect TV according to your personal requirement, connect methods as follows: RF cable connection 1. Use a standard Audio/Video cable to connect the Audio/Video out jack on the Converter Box to the Audio/Video input jack on the DVD recorder. Follow the instructions (indicated in the "Connection Cable" section) to connect the power supply and other required peripheral devices. After the TV is on, press POWER on the remote control or POWER on the top of the Digital-to-Analog Converter Box to turn on the Digital-to-Analog Converter Box. After the Digital-to-Analog Converter Box is turned on, it will automatically lead you to the Install Guide. You can perform the following setup tasks after entering the "MENU" : Use the buttons to select input according to your personal requirement. Note: If you want to re-scan channel when the Lock System is set on the "On" mode, then you have to input the previous Lock Password number. Use the buttons to move the color block to define certain programs you wish to delete or add, press OK. Use the buttons to select Time Zone to the time zone where you are located. Note: If your television is equipped with a caption feature, you may want to turn captioning off on your television in order to avoid double captions on the screen. Note: If remote control has been inactive for more than 4 hours, the Converter Box will automatically go into sleep mode. To reset the setting to the factory default, please press OK button, select Yes then press OK. Note: If you want to return to factory default settings when the Lock System is set on the "On" mode, then you have to input the previous Lock Password number. [. . . ] This section describes some frequently asked questions or malfunctions you may encounter during the course of using this Digital-to-Analog Converter Box. Q&A Solutions Check to make sure the power cord is plugged in securely to the wall outlet and is without damage. Intermittent signal or Make sure your antenna is connected and is without damage. Remote control does Make sure you have fresh batteries installed properly into the not work. [. . . ]