User manual ARIENS 924048

[. . . ] It should be connected only to a safety socket with a single 10-A fuse. Before commissioning the appliance pay attention to the fact that the correct plug-in power supply unit (observe marking) has been connected properly. Important: Do not under any circumstances carry out electrical repairs or alterations yourself. Always ensure that such work is done by a properly qualified electrician. [. . . ] Important: disconnect the apparatus from the mains before doing repair, maintenance or cleaning work. If an extension cable is being used, ensure that it complies with the VDE regulations. Ensure that the power cable is not pinched and that no-one can trip over it. all electric appliances emit electromagnetic radiation when in operation. Mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e. Before beginning your program of exercise, consult your doctor to ensure that you are fit enough to use the equipment. Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by ARIENS service staff or qualified personnel trained by ARIENS. Always observe the general safety rules and precautions for working with electrical equipment. Should you have any cause for complaint, please contact your ARIENS dealer. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. If in doubt call upon the help of a second person, if possible technically talented. Please note that there is always a danger of injury when working with tools or doing manual work. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!The fastening material required for each assembly step is shown in the diagram inset. Bolt all the parts together loosely at first, and check that they have been assembled correctly. [. . . ] The fastening material required for each assembly step is shown in the diagram inset. Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. [. . . ]