User manual ARCTIC COOLING VR002 INSTALLATION

[. . . ] Accessories Set VR002 Installation Manual For further information, please consult www. arctic. ac Compatibility nVIDIA GeForce GTX 285, 280, 275, 260+, 260 Accessories Heatsinks x 8 Heatsinks x 7 Heatsinks x 2 Heatsinks x 4 Heatsinks x 2 Heatsinks x 1 Mounting plate x 1 Screws (M3) x 2 Screws (M2. 5) x 4 Screws (M2) x 7 Spacers x 4 Washers x 4 Adhesive Tape x 1 Thermal pad for NVIO heatsink (10x 10 x 1mm) x 1 *Thermal adhesive (3g) x 1 *Be aware that the thermal adhesive comes with a very short shelf life and shall be used within 1 week. [. . . ] Fasten each screw alternately (screw A-> D -> B -> C) with 2 to 3 clockwise rotations. Repeat until all 4 screws are tightened. Tips for applying thermal adhesive RAM Voltage regulator How to squeeze out all the glue? Apply pressure (10 sec) Cure time 60mins Caution: Please make sure the heatsinks are not touching any circuit components as it may cause a short circuit to your VGA card. Installation of RAM and voltage regulator heatsinks 1 Installation of mounting plate 1. Uninstall default mounting plate Heatsinks align to the Botto m Heatsinks align to the right Heatsinks align to the left 2 2. Install replacement mounting plate comes with the accessories set Installation of main cooler Please follow the installation instructions provided with the main cooler. ARCTIC Switzerland Huobstrasse 4 8808, Pfäffikon, Switzerland www. arctic. ac Copyright 2010 ARCTIC Switzerland. [. . . ] In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ]