User manual ARCAM FMJ MS250

[. . . ] MS250 Safety guidelines CAUTION: To reduce the risk of electric shock, do not remove cover (or back). WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] See your dealer for further information on this option. MS250 10 Operating the MS250 The menu system The MS250 is controlled using its menu system. This is best viewed on a TV or a computer monitor, connected as described on page 7. The menu system is also displayed on the front panel display, which is sufficient for routine control, especially when you have become familiar with the MS250's capabilities. Navigation around the menus is performed using either the remote control or the buttons on the front panel. The remote control includes useful shortcut keys and is easier to use. The front panel display acts as a `window' on the menu system showing a necessarily restricted view of the whole. Use the up, down, left and right keys to navigate to each corner of the menu displayed. The picture below shows an example. Switching on On first powering on, the front panel display displays the power on message. After initialization has completed, the MUSIC SOURCE home page appears: Any time you wish to return to the MUSIC SOURCE (or `Home') page, you can do so by simply pressing HOME on the remote or on the front panel. NOTE The front panel display is shown on this page, but for clarity, only the TV/Monitor display is shown in the rest of this section. Most of the features may be operated using the front panel buttons to navigate, using information shown on the front panel display. MS250 11 Playing CDs To play a CD, press LOAD (or OPEN on the remote control) to open the CD tray. Press LOAD again (or OPEN again on the remote control) to close the tray. After a few seconds, the track names appear on the display. To select particular tracks, use the C and B keys on the remote (or on the front panel) to move down and up the tracklist. 6 and 5 keys NOTE If the MS250 is not connected to the Internet, or the database does not contain details for the CD inserted, tracks will be listed by number only. OK toggles a track from selected (red square before the track number) indicating that the track is to be played; to unselected (open square before the track number), indicating that the track is to be skipped. The MS250 plays all selected tracks from the highlighted track to the end of the selection. If you have set the `Repeat' item to `Repeat: on', playing starts again from the first selected track. You can also instruct the MS250 to play tracks in a random order from the CD by changing the `Shuffle' menu item to `Shuffle: on'. See pages 9 and 10 (`Front panel controls' and `Using the CR-425 remote control') for how to pause, stop, skip tracks, etc. After a delay to collect the information, the display on the TV/monitor (and a version of the information on the front panel) appears: NOTE The front panel display indicates the volume level (0-100). If you can access your amplifier's volume control, you should set the MS250 volume control to maximum (100) and adjust the volume level on the amplifier to your requirements. MS250 12 Storing a CD on the MS250 To store the contents of a CD on the MS250, select Store from the left hand window of the CD menu. selected: Editing CD details This page allows you to enter or modify information for the CD. This is useful if the details for the CD could not be retrieved by the MS250 or if you wish to modify any of the details shown. You can now enter the text required using the number keys on the remote: TIP This menu page is not shown on the front panel display. Attaching a USB or PS/2 keyboard to the MS250 will make the task quicker and easier. < To make an alphabetic selection using the number keys, press the key once for the first letter below the key, twice for the second letter, etc. , as on a mobile phone. Press the Press the to move the cursor left and right. D and E keys < < To enter uppercase letters, press the in brackets on the menu page. [. . . ] Many ISPs can provide a suitable router when a USB modem to the unit directly. you sign up; if not, you will need to purchase one of these from a computer The USB ports are for use with store. Configure the router according to the instructions provided with it and the configuration information provided by your ISP. If you are using a wired Ethernet configuration, connect the MS250 to a spare LAN port on the Ethernet Router using a straight-through Ethernet cable. [. . . ]