User manual ARCAM FMJ CD17

[. . . ] To prevent water dripping or splashing into the equipment, do not use near water ­ for example near a bathtub, kitchen sink or swimming pool, etc. Object or liquid entry Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. Liquidfilled objects such as vases should not be placed on the equipment. Placing the equipment Only use a rack or shelf that is stable and strong enough to support the weight of this equipment. 5. [. . . ] e-11 5 1 2. 39 e-3 english Arcam's CD17 provides class-leading sound quality from compact discs. The CD17 has a Delta-Sigma DAC (Digital-to-Analogue Converter) with 24-bit filtering, allowing fine details to be reproduced in startling clarity. The CR10 remote control supplied with the CD17 is simple to use and can also control an Arcam amplifier. The high performance CD17 audio disc player is designed to truly bring your music to life. installation Placing the unit < < < Place the CD17 on a level, firm surface, avoiding direct sunlight and sources of heat or damp. Do not place the CD17 in an enclosed space such as a bookcase or closed cabinet unless there is good provision for ventilation. Do not place any other component or item on top of the CD17 as this may obstruct airflow around the unit, causing the CD17 to run hot. Make sure the remote-control receiver to the left of the front panel display is unobstructed, otherwise this will impair the use of the remotecontrol. Record decks are very sensitive to the noise generated by mains power supplies which will be heard as a background `hum' if the record deck is too close. Power The CD17 is supplied with a moulded mains plug already fitted to the lead. Check that the plug supplied fits your supply ­ should you require a new mains lead, please contact your Arcam dealer. If your mains supply voltage or mains plug is different, please contact your Arcam dealer immediately Push the IEC plug end of the power cable into the socket on the back of the CD17, making sure that it is pushed in firmly. Plug the other end of the cable into your mains socket and, if necessary, switch the socket on. interconnect cables We recommend the use of high-quality screened cables that are designed for the particular application. Other cables will have different impedance characteristics that will degrade the performance of your system (for example, do not use cabling intended for video use to carry audio signals). It is good practice when connecting your equipment to make sure that the mains power-supply cabling is kept as far away as possible from your audio cables. Failure to do so may result in unwanted noise in the audio signals. < < < e-4 Power inlet Connect the correct mains cable here. Voltage select Ensure the voltage selected matches the local power supply. optical digital output Use this socket if you are using a separate DAC or digital recorder with an optical connection. Connect using a suitable optical cable. analogue audio outputs Connect these to your amplifier's CD or other line-level input using suitable high quality interconnect cables. Ensure that the left and right audio outputs from the CD player are connected to the same left and right inputs on your amplifier. The second set of sockets can be used to connect to a second amplifier set up for multi-room use. coaxial digital output Use this socket if you are using a separate digital to analogue converter (DAC) or digital recorder. Connect to the DAC or recorder's digital input using a suitable 75 screened cable. CAUTION: Never connect the digital output socket to a conventional audio input. e-5 english 1 1 0. 52 operation Front panel operation These functions can also be controlled by CR10 remote control. (See pages 8­9 for details. ) cds with text SToP Press to stop the CD playing. The display shows `0' and the number of tracks. load You will see the total number of tracks and the total disc time with the `CD TEXT' icon illuminated in the display. The artist and album title scrolls across the display before returning to show the artist and total number of tracks. PoWeR Press this button to switch the CD player on and off. [. . . ] EC COUNTRIES ­ This products have been designed to comply with EMC Directive 2004/108/EC. USA ­ These products comply with FCC Part 15 Class B. laser radiation If the CD17 compact disc player is operated whilst the outer casing is removed, invisible laser radiation could cause eye damage. e-10 Worldwide guarantee product guarantee This entitles you to have the unit repaired free of charge, during the first two years after purchase, at any authorised Arcam distributor provided that it was originally purchased from an authorised Arcam dealer or distributor. The manufacturer can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorized adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under the guarantee. The warranty covers: Parts and labour costs for two years from the purchase date. The warranty does not cover transportation costs at any time. claims under guarantee This equipment should be packed in the original packing and returned to the dealer from whom it was purchased, or failing this, directly to the Arcam distributor in the country of residence. [. . . ]