User manual ARCAM DV78

[. . . ] HANDBOOK/MANUEL/HANDBUCH/HANDLEIDING DV 78 Arcam DV78 DVD player Lecture de DVD Arcam DV78 DVD-Spieler Arcam DV78 Arcam DV78 DVD-Speler English Français Deutsch Nederlands DV78 2 Using this handbook This handbook has been designed to give you all the information you need to install, connect, set up and use the Arcam DiVA DV78. The remote control handset supplied with the equipment is also described. It may be that the DV78 has been installed and set up as part of your Hi-Fi installation by a qualified Arcam dealer. In this case, you may wish to skip the sections of this handbook dealing with installation and setting up the unit. [. . . ] Note that the volume (+/­) controls and MUTE button have no effect on the audio output level of the DVD players. P MODE SUBT TITLE MENU Advanced controls These buttons are described on the facing page. ZOOM AUDIO MEM RTN ANGLE SETUP STATUS SRCH CR-314 NOTE: Remember to install the two AAA batteries supplied before trying to use your remote control. DV78 12 Do not place anything in front of the display area on the DVD player (where the IR receiver is located), or the remote control may not work. Advanced controls (CR-314) MEM (memorise) It is possible to `bookmark' up to three points on a DVD title, so you can quickly jump to those parts of the title again. Press MEM to access the `Bookmark' menu. SUBT (subtitle) Press SUBT on the remote control to cycle through the available subtitle languages, including `OFF'. Some discs force subtitles on, over-riding player set up. TITLE Press TITLE to access the DVD's `Title' menu. Note that this feature only applies to multi-title discs. P MODE Press P MODE to toggle random playback MENU Press MENU to access the DVD `Disc' menu. This navigation menu is specific to a disc and varies for each title, but typically offers facilities to select chapters, languages, and view extra material such as trailers or documentaries. Once the menu has been accessed, use the cursor pad to move around the menu and press OK to activate a menu `button'. SUBT TITLE MENU ZOOM Press ZOOM to enlarge a particular area of the picture. Each press of the ZOOM button increases the zoom, normally until a maximum of 4x enlargement is reached (although the amount of zoom possible varies depending on the type of disc: in some cases no zooming is possible). Pressing ZOOM when the maximum enlargement has been reached returns the image to normal size. While using the zoom function, the cursor pad can be used to move around within the image. Note that a zoom level of x1. 25 is particularly useful if the output from the DVD player is in a screen format different from that of your TV. A zoom of x1. 25 when a `widescreeen' image is displayed on a 4:3 TV causes the bars at the top and bottom of the screen to disappear (although the sides of the image are lost); a zoom of x1. 25 when a 4:3 image is displayed on a widescreen TV causes the bars at the side of the image to disappear (although the top and bottom of the image are lost). P MODE ZOOM AUDIO MEM RTN RTN (return) Press RTN to move back through the DVD `Disc' and `Title' menus. Note that this feature is only of use with discs using multi-level menus. ANGLE SETUP STATUS SRCH SRCH (search) It is possible to access any point on the disc directly using the `Search' menu. Press SRCH to access the `Search' menu. ANGLE Some DVDs offer the facility to select different camera angles. If this feature is available the `camera' symbol lights in the display. Press ANGLE to cycle through the available angles. STATUS Press STATUS once to show the elapsed and remaining time of the disc. Press STATUS a second time to give play status information about the current disc. SETUP The status information displayed varies depending on the type of disc ­ DVD, CD or VCD. `Setup' allows you to configure the DV78 for use in your system. Ensure that no disc is playing and press SETUP to access the `Setup' menu. AUDIO Some DVDs offer the facility to select different audio tracks. DV78 13 English Using the CR-415 remote control 0­9 keypad OPEN Opens and closes the disc tray This allows direct access to individual tracks on audio CDs. To select a track, press the corresponding keypad button followed by OK. For example, to play track 15, press 1, then 5, then OK. DISP (display) Dims or turns the DV78's display on or off. [. . . ] `HQ video' is set incorrectly in `Setup' menu Component or RGB video leads are crossed `TV system' is set incorrectly in `Setup' menu Enter the `Setup' menu and check the `HQ video' setting (see page 9) Check wiring between the DV78 and the TV monitor Enter the `Setup' menu and check the `TV system' setting (see page 9) If your television can handle both NTSC- and PAL-format video, then enter the `Setup' menu and change the `TV system' setting (on the `Video' page) to `Auto'. Picture is `jerky' or shimmers This occurs when NTSC discs (such as those from the USA) are played in a machine where the output is set to PAL (such as those sold in Europe), or vice-versa This is caused by the player changing layers on a two-layer disc The disc is dirty or damaged The picture freezes for a moment approximately half way through a film The picture freezes for a moment at random points in a film There is no fault. Further information about disc layer changes can often be found on the rear cover of the disc packaging. A damaged or dirty disc may cause audio and/or video drop-outs to occur (and may be accompanied by increased drive noise). Clean or replace the disc. DV78 20 Problems with audio output Problem No sound! [. . . ]