User manual ARCAM DT26

[. . . ] CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and insert the plug fully into the socket. CAUTION: Use of any controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure. important safety instructions 1) Read these instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] Select an option using the '/, cursor keys and press O to select it. < Browse Pictures / Browse Music: Changes the file type to be played and navigates to the media device showing the file type selected. < Now Playing: Displays the playback status for music files. A dd T o P laylis t Use the '/, cursor keys on the remote control to highlight the media file type to play/view. The 'Play' menu is displayed: P lay (F ile) Select an option using the '/, cursor keys and press O to select it. < Play All: Plays all the files of the selected type on the disc or device. < Play Current Folder: Plays all the files of the selected type in the current folder. When a play option is selected, the media will play and the "now Playing" information panel will be shown: File : 1 / 1 Animals - When I dream. mp3 Title : Artis t : Album 0 : 00 : 28 0 : 04 : 36 Mus ic 2 item(s ) If the file has already been added to the playlist, the following menu is displayed: Main Menu P lay F iles B rows e P ic tures Now P laying P laylis t R emove from P laylis t P lay (F ile) Off Off P lay US B 1 Play menu Media menu NOTE < "Play (File)" cannot be selected for JPEg images. Add the images to be viewed to the playlist in order to play a slideshow of images. < The playlist is cleared whenever the USB device is removed or the optical disc is ejected. To play all available files without making any selection, press < to go to the Play menu, described below. To select particular files, use the '/, cursor keys on the remote control to highlight the media device to navigate in the Media menu. note that during the playback of music, video or JPEg files further button presses may be required to exit the folder structure. Press > to enter the Settings menu. navigating the menus The DT26 menus can be navigated by using the cursor (arrow) keys on the remote control. Use the B and C keys to navigate up and down the main section headings in the left-hand panel. Once you have the main section that you require highlighted, use the E key to enter the section. Use the B and C keys to navigate up and down the section settings in the right-hand panel. go back to step 4 to adjust the other settings in the current section. Press < or RETuRN to go back to the previous screen, to select another section to adjust. S ys tem Network Info Dis play Dis play HDMI S tatus HDMI P referred F ormat T V T ype R es olution T V A s pec t F ilm Mode C olor Depth C onnec ted 720p NT S C HDMI A uto 16: 9 P illarbox Off 24 B it entering the settings menu A udio L anguage P arental unstable oSd menu or picture display? The default DT26 output video resolution when first powered up out of the box has been chosen according to the national standard in the country wheso that most display devices can synchronise to the video signal automatically. If the output resolution and frame rate is set to a setting your display device does not support, the picture may become unstable or may not display at all. If this happens, connect the DT26 directly to your display using the composite video connection in order to see the menus. Once the correct video settings have been entered, a higher-quality connection can be used. e-20 display TV Type ­ Set the video signal format. If the colour or picture quality of analogue video appears incorrect, change this setting. [. . . ] Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. BECAUSE THE PrOgrAM IS LICEnSED FrEE OF CHArgE, THErE IS nO WArrAnTY FOr THE PrOgrAM, TO THE EXTEnT PErMITTED BY APPLICABLE LAW. EXCEPT WHEn OTHErWISE STATED In WrITIng THE COPYrIgHT HOLDErS AnD/Or OTHEr PArTIES PrOVIDE THE PrOgrAM "AS IS" WITHOUT WArrAnTY OF AnY KInD, EITHEr EXPrESSED Or IMPLIED, InCLUDIng, BUT nOT LIMITED TO, THE IMPLIED WArrAnTIES OF MErCHAnTABILITY AnD FITnESS FOr A PArTICULAr PUrPOSE. THE EnTIrE rISK AS TO THE QUALITY AnD PErFOrMAnCE OF THE PrOgrAM IS WITH YOU. [. . . ]