User manual ARCAM CR100

[. . . ] Ha n d b o o k CR100 CR100 remote control English Arcam CR100: one remote for many devices Contents arcam CR100: one remote for many devices . . . . . . E-4 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-5 Controlling other devices:Method 1 (direct code setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6 Controlling other devices:Method 2 (Library search) E-7 Code blink-back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Functions as original remote key, if available Cycles through the front panel display's brightness options (dim to bright, off) Toggles the mute function, if available. Sends Preset Down command Sends Preset Up command Decrease (­) and increase (+) amplifier volume Fast rewind (DAB rewind radio) Play (DAB rewind radio) Toggles pause of playback (DAB rewind radio) Fast forward (DAB rewind radio) CR100 E-11 aMP mode Toggles power between stand-by and on. 1 to 2 3 4 5 6 7 8 Sends Preset Down command Sends Preset Up command Decrease (­) and increase (+) amplifier volume Toggles Direct mode Toggles EQ on/off on Arcam surround amplifiers with room EQ function Cycles through available THX modes on Arcam surround amplifiers with THX function Cycles through stereo effects on Arcam surround amplifiers Restores current Favourite Preset on Arcam surround amplifiers, if available Displays lip sync adjustment menu on Arcam surround amplifiers Displays subwoofer adjustment menu on Arcam surround amplifiers DVD input CD player input AV (television sound input) AUX Auxiliary line input VCR Video Cassette Recorder input SAT Satellite decoder input TUN DAB/FM/AM tuner input Phono input, if available Selects Tape input on amplifier Selects FM band on Tuner Modifies many keys (see individual key descriptions, below) Selects multichannel (MCH) input on amplifier Selects AM band Navigate the menus on Arcam surround amplifiers ok confirms a selection. Displays trim levels menu on Arcam surround amplifiers Toggles between FM/ Mono-Stereo/Mute on AVR Toggles between Tune and Preset mode on AVR Stores tuner preset on AVR Cycles through RDS Info options on AVR B to Power on SHIFT C to Power off SHIFT E to switch Zone 2 SHIFT on, if available. SHIFT D to switch Zone 2 off, if available. Confirms a setting (equivalent to `Enter' or `Select' on some remotes) Changes Audio mode Activates the main menu on Arcam amplifier Cycles through Display panel brightness options (dim to bright, off) Toggles the mute function, if available. By default this key always operates the AMP Mute CR100 E-12 aUX mode Toggles power between stand-by and on. By default, AUX mode has been set up for future ARCAM products. English The AUX control page can be assigned for use with a DVD or VCR player using the following method: 1. Unlock the code page (this is described on page 18 ­ `Locking/ Unlocking a specific device mode'). The functions of AUX mode can now be replaced by those of a DVD or VCR by changing the four-figure device code (this is also explained on page 18 ­ `Mode Mover'). Now lock the mode so the new settings are not changed inadvertently. to Functions as original remote number key. Selects Tape input on amplifier (not used) Modifies many keys (see individual key descriptions, below) Selects multichannel (MCH) input on amplifier (not used) Navigate setup and programme selection menus. Confirms a setting (equivalent to `Enter' or `Select' on some remotes) Behaviour of all other CR100 keys in AUX mode depends on the type of auxiliary device. Refer to the appropriate table for the device. CR100 E-13 VCR mode Toggles power between stand-by and on. Ejects tape Stop playback Starts recording to Functions as original remote number key. Selects Tape input on amplifier Toggles between available inputs (e. g. AV1, AV2) Modifies many keys (see individual key descriptions, below) Selects multichannel (MCH) input on amplifier (not used) Displays Search menu, if available Red selection button (if used) Green selection button (if used) Yellow selection button (if used) Blue selection button (if used) Navigate setup and programme selection menus. Confirms a setting (equivalent to `Enter' or `Select' on some remotes) Operates the Exit function if the VCR uses this feature Turns on the Menu function if the VCR uses this feature Toggles display between TV and VCR Toggles the mute function, if available. By default this key always operates the AMP Mute Channel down Channel up. Decrease (­) and increase (+) amplifier volume Fast rewind Play Toggles pause of playback Fast forward CR100 E-14 Cd mode Toggles power between stand-by and on. Fast forward Open/close disc tray Stop playback to Selects Tape input on amplifier Toggles random (`shuffle') play on and off Modifies many keys (see individual key descriptions, below) Selects multichannel (MCH) input on amplifier Cycles through repeat options (track, disc, etc. ) Navigate the menus on Arcam surround amplifiers ok confirms a selection. SHIFT SHIFT Start recording (on products that have this feature) Scans first 10 seconds of each track on CD (Audio search) Starts Program mode Clears programmed item Starts and stops A-B repeat function (not used) B to Power on C to Power off. Confirms a setting (equivalent to `Enter' or `Select' on some remotes) Changes the time display modes on Arcam CD player (not used) Cycles through the front panel display's brightness options (dim to bright, off). By default this key always operates the AMP Mute Press and release to skip back to the beginning of the current/previous track. Press and release to skip forwards to the beginning of the next track. Decrease (­) and increase (+) amplifier volume Fast rewind Play Toggles pause of playback CR100 E-15 English Functions as original remote number key. Customising the CR100 Code Learning The CR100 comes with a complete library of preprogrammed codes. After you have set up the CR100 for your device, you may find that there are one or more functions on your original remote which do not have a place on the CR100 keypad. For convenience, the CR100 offers a Code Learning feature that allows you to copy up to 16 functions from an original remote control onto the CR100 keypad. [. . . ] Press and hold until the power . To toggle a Device Mode lock setting: 1. Press until the power . four times LED blinks twice: . < < The power LED blinks twice when being locked, and blinks four times when being unlocked. If you enter an invalid key sequence, the power LED gives one long blink and returns to normal operation. Now, whichever mode you're in, you will have direct access to that device's volume or mute functions, assuming they are available. You would need to switch to aMP mode to alter the Amplifier volume Example: To restore default volume punch-through settings in VCR, dVd, aMP and SaT mode 1. [. . . ]