User manual ARCAM CD62

[. . . ] Object or liquid entry Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. Liquid filled objects such as vases should not be placed on the equipment. 13. Non-use periods If the unit has a standby function, a small amount of current will continue to flow into the equipment in this mode. Unplug the power cord of the appliance from the outlet if left unused for a long period of time. 4. [. . . ] Please contact your Arcam dealer for details of suitable cables. Mains lead The appliance is normally supplied with a moulded mains plug already fitted to the lead. If for any reason the plug needs to be removed, it must be disposed of immediately and securely, as it is a potential shock hazard when inserted into the mains socket. Should you require a new mains lead, contact your Arcam dealer. Audio outputs Connect these to your amplifier's CD or any other line-level input using suitable high quality interconnect cables. Ensure that the left and right audio outputs from the CD player are connected to the same left and right inputs on your amplifier. Plugging in Push the plug (IEC line socket) of the power cable supplied with the unit into the socket (POWER INLET) in the back of the unit. Put the plug on the other end of the cable into your power supply socket and switch the socket on. Coaxial digital output Use this socket if you are using a separate digital to analogue converter (DAC) or digital recorder. Connect to the DAC or recorder's digital input using a suitable 75 screened cable. CAUTION: Never connect the digital output socket to a conventional audio input. Optical digital output Use this socket if you are using a separate DAC or digital recorder with an optical connection. Connect using a suitable optical cable. Remote input It is not necessary to make any connection to this socket in normal use. The connection is for ease of installation to multiroom remote control systems and is suitable for modulated IR commands. Contact your multi-room installer for more information. CD62 rear panel (part) 230V DIGITAL OUTPUTS AUDIO OUTPUT REMOTE IN POWER INLET CO-AXIAL OPTICAL R L 1 23 4 5 CD62 4 1 Power inlet, with voltage indicator 2 Coaxial digital output 3 Optical digital output 4 Single audio output 5 Remote input Using your CD player COMPACT DISC PLAYER CD62 24 BIT DAC LOAD PLAY STOP PAUSE TRACK POWER 2 345 6 7 1 POWER 1 SKIP TRACK 7 or Press this button to switch the CD player on and off. When first powered up with no CD installed the display shows: To start a CD with a track other than the first, press to locate the desired track. --NO DISC-LOAD 2 or . The To select another track during play, press once track is played automatically after selection. To go back two tracks, press three times, and so on. To install a CD, press LOAD (or OPEN on the remote control). Press LOAD again (or press PLAY, or gently push the tray in 5mm) to close the tray. You will see the total number of tracks and total disc time, for example. . . TRACK INDEX MIN SEC CDs with text Load You will see the total number of tracks and the total disc time with `CD TEXT' illuminated in the display. The artist and album title scrolls across the display before returning to show the artist and total number of tracks. TRACK INDEX MIN SEC 8 1 52. 19 12345 678 ANASTACIA CD TEXT 12345 6 7 8 9 10 11 12 The display returns to `0' after a few seconds. The disc is now ready to play. Play The track number is briefly displayed, followed by the track title scrolling across the display. The display returns to showing the track number and time. PLAY 3 Press to play the CD. Make sure your amplifier's input source selector is set to the correct input. Track selection When a new track is selected, the track number is briefly displayed, followed by the track title scrolling across the display. NOTE: The track title is always displayed when a track is selected, either for playing or programming. The text display supports English only. STOP 4 5 Press to stop the CD playing. The display shows `0' and the number of tracks. PAUSE Press to pause the disc (interrupt play). [. . . ] Connecting the CD player and the tuner to different mains sockets can also help to reduce interference. EC COUNTRIES -­ This product has been designed to comply with directive 89/336/EEC. USA ­ This product complies with FCC requirements. Laser radiation If an Arcam CD player is operated whilst the outer casing is removed, invisible laser radiation could cause eye damage. CD62 7 Guarantee Worldwide Guarantee This entitles you to have the unit repaired free of charge, during the first two years after purchase, at any authorised Arcam distributor provided that it was originally purchased from an authorised Arcam dealer or distributor. The manufacturer can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under the guarantee. [. . . ]