User manual AQUA-TRONICS EARTH GRADIENT CABLE FAULT DETECTOR EG3000T

[. . . ] Visit divx. com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. “DivX Certified® to play DivX® video up to HD 1080p, including premium content. ” “DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. ” “Covered by one or more of the following U. S. [. . . ] Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. If yy the product feels cold to the touch, there may be a small “flicker” when it is turned on. The yy panel is a high technology TFT product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. y This phenomenon also occurs in third-party products and is not subject to exchange or refund. You yy may find different brightness and colour of the panel depending on your viewing position(left/right/top/down). It is not related with the product performance, and it is not malfunction. ENGLISH ENG Displaying a still image (e. g. , broadcasting channel logo, on-screen menu, scene from a video yy game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The illustrations in this manual may differ from the actual product and item. CAUTION yy Do not use any unapproved items to ensure the safety and product life span. yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty. yy Some models have a thin film attached on to the screen and this must not be removed. NOTE yy The items supplied with your product may vary depending on the model. (If they are not fastened securely enough, the TV may tilt forward after being installed. )y Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. Front NOTE Stand Base yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. Top View 2 3 Tidying cables 1 Use Cable Management to neatly secure and position cables together. 2 Fix the Cable Management firmly to the TV. M4 x 20 4EA Cable Management 16 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. --  eave a 10 cm (minimum) space from the L wall for proper ventilation. Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20 20 ENGLISH ENG 10 cm 10 cm m 10 c 10 cm CAUTION yy When adjusting the angle of the product, watch out for your fingers. If the product is tilted too much, it may fall, causing damage or injury. 2 Connect the power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. Securing the TV to a table Fix the TV to a table to prevent from tilting forward, damage, and potential injury. (Only 32/37/42CS56**) To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. WARNING yy To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. ASSEMBLING AND PREPARING 17 Securing the TV to a wall (This feature is not available for all models. ) Using the Kensington security system (This feature is not available for all models. ) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit . Connect the Kensington security system cable between the TV and a table. ENGLISH ENG 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. [. . . ] Make sure to point the remote control toward the remote control sensor on the TV. Adjusts the brightness of the screen to reduce energy consumption. Accesses the AV devices connected with the HDMI cable through HDMI-CEC. ( : Red, : Green, : Yellow, : Blue) Controls the MY MEDIA menus, or the SIMPLINK compatible devices (USB, SIMPLINK). These buttons are used for teletext. Navigation buttons (up/down/left/right) 1 2 3 1 Coloured buttons 2 Control buttons ( ) 3 TELETEXT BUTTONS 24 USINGyTHEyUSERyGUIDE USING THE USER GUIDE UseryGuideyallowsyyouytoymoreyeasilyyaccessytheydetailedyTVyinformation. ENGLISH ENG 1y PressySETTINGSytoyaccessytheymainymenus. [. . . ]