User manual APC SMART-UPS SC 1500VA

[. . . ] i Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Table of Contents Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Click the Browse button to navigate to a folder, located on the USB storage device. Permission: Here the user can select the appropriate permission setting for this user account. Permissions available for selection, from the drop-down menu are Read Only and Read/Write. Read Only permission will only allow this account to read data stored on the USB storage device within the constrains of the access path specified. Read/Write permission will allow this account to read and write data to and from the USB storage device within the constrains of the access path specified. Click the Append button to add a blank account with the access path and permission specified. Click the OK button to accept the changes made for the existing account. D-Link DIR-850L User Manual 64 In the Number Devices section, the user can view information about the external USB storage devices inserted into the USB port of this router. The following parameters will be available in the display Number of Devices: This field will display the number of USB storage devices that are attached to the USB port of the router. Total Space: This field will display the total space that is available on the USB storage device attached. Free Space: This field will display the free space that is available on the USB storage device attached. Choose the required IPv6 Internet Connection type and click on the Next button to continue. Click on the Cancel button to discard all the changes made and return to the main page. Click on the Next button to continue. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-850L User Manual 69 Section 3 - Configuration IPv6 over PPPoE After selecting the IPv6 over PPPoE option, the user will be able to configure the IPv6 Internet connection that requires a username and password to get online. The following parameters will be available for configuration: PPPoE Session: Select the PPPoE Session value used here. This option will state that this connection shares it’s information with the already configured IPv6 PPPoE connection, or the user can create a new PPPoE connection here. This option is optional. D-Link DIR-850L User Manual 70 Section 3 - Configuration Static IPv6 Address Connection This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Use Link-Local The Link-local address is used by nodes and routers when Address: communicating with neighboring nodes on the same link. This mode enables IPv6-capable devices to communicate with each other on the LAN side. Length: Default Gateway: Enter the WAN default gateway IPv6 address used here. [. . . ] Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. From the desktop, right-click My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router´s LAN IP address is 192. 168. 0. 1, make your IP address 192. 168. 0. X where X is a number between 2 and 99. [. . . ]