Detailed instructions for use are in the User's Guide.
[. . . ] instruction manual
ViewPoint
Wireless Touch Panels (Extended Range) (Firmware version G3)
Touc h Pa n els an d A cc e ss o r ie s
AMX Limited Warranty and Disclaimer
AMX Corporation warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX Corporation, with the following exceptions: · · · Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year. AMX Lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX Lighting products are under warranty. AMX Corporation does guarantee the control of dimmable loads that are properly connected to our lighting products. [. . . ] variable text address = 1 - 255 color number = See the Colors and Programming Numbers table on page 23. Example:
SEND_COMMAND TP, "'@CFN', 1, 30"
Sets the ON feedback fill color to Aqua for variable text button 1.
24
ViewPoint Wireless Touch Panels
Programming
Shorthand Send_Commands (Cont. )
@CPG This only works if the new background color is not the same as the current color. Sets the page with Syntax: specified page "'@CPG', <color_number>, '<page name>'" name backVariables: ground color to color number = See the Colors and Programming Numbers table on page 23. page name = 1 50 ASCII characters Example:
SEND_COMMAND TP, "'@CPG', 87, 'Main Page'"
Sets the page title to Main Page, and the color to Black. @CPP Sets the specified page's background color to the specified color. This only works if the specified background color is not the same as the current color. Syntax:
"'@CPP', <color_number>, '<pop-up page name>'"
Variables: color number = See the Colors and Programming Numbers table on page 23. pop-up page name = 1 50 ASCII characters Example:
SEND_COMMAND TP, "'@CPP', 54, 'Audio Page'"
Sets the popup page title to Audio Page, and the color to Purple. This only works if the specified background color is not the same as the current color. Syntax:
"'@CTF', <variable text address>, <color_number>"
Variables: variable text address = 1 255 color number = See the Colors and Programming Numbers table on page 23. Example:
SEND_COMMAND TP, "'@CTF', 1, 87"
Sets the OFF feedback text color to Black for variable text button 1. @CTN This only works if the specified background color is not the same as the current color. Sets the ON feed- Syntax: back text color to "'@CTN', <variable text address>, <color_number>" the specified Variables: color. variable text address = 1 255 color number = See the Colors and Programming Numbers table on page 23. Example:
SEND_COMMAND TP, "'@CTN', 1, 72"
Sets the ON feedback text color to White for variable text button 1. @IDP Queries the touch panel to return a string with the TPDesign3 project name. Syntax:
"'@IDF'"
Example:
SEND_COMMAND TP, "'@IDF'"
The touch panel returns its MS-DOS file name in a string. Syntax:
"'@IDP'"
Example:
SEND_COMMAND TP, "'@IDP'"
The touch panel returns a string containing the TPDesign3 project name.
ViewPoint Wireless Touch Panels
25
Programming
Shorthand Send_Commands (Cont. )
@PPA If no page is specified, the active page is used. Removes all Syntax: popup pages from "'@PPA-<page name>'" a specified page. Variable: page name = target touch panel page name Example:
SEND_COMMAND TP, "'@PPA-Main Page'"
If there were several popup pages on 'Main Page' that are active, sending the previous command would remove them all from that page. Syntax:
"'@PPF-<popup page name>;<page name>'"
Variables: popup page name = target popup page name page name = target touch panel page name Example:
SEND_COMMAND TP, "'PPF-Laser Disc 2 Transport Control; Laser Disc Control Page'"
Deactivates the Laser Disc 2 Transport Control popup page on the Laser Disc Control Page. Syntax:
"'@PPK-<popup page name>'"
Variable: popup page name = target popup page name Example:
SEND_COMMAND TP, "'@PPK-Laser Disc 2 Transport Control'"
Deactivates the Laser Disc 2 Transport Control popup page on all touch panel pages. [. . . ] 9) provides a built-in battery charger and an angled desk docking station to cradle your ViewPoint touch panel. When a ViewPoint is placed in the docking station's cradle, the ViewPoint makes contact with the charging pins and power is supplied by the docking station.
ViewPoint Wireless Touch Panels
49
VPA-DS ViewPort Docking Station
VPA-BP ViewPoint Battery
Charging Pins Battery Compartment ViewPort Docking Station FIG. 9 ViewPort Docking Station (shown with two types of battery charging methods) Green LED Red LED Yellow LED
Battery charging Power to charge the battery is supplied to the VPA-DS when the power supply is plugged into the rear power connector on the docking station (FIG. A ViewPoint battery can be charged in three different ways: An external power supply can be plugged into the side of the ViewPoint which will supply external power to run the panel and the onboard battery charger. [. . . ]