User manual AMX RDA-CKM DUAL CHOKE MODULE

[. . . ] Installation Sheet RDA-CKM Dual Choke Module The RDA-CKM Dual Choke Module is used for debuzzing, lamp noise reduction, and to correct minor common neutral interactions. [. . . ] Run all low-voltage and control wires away from heat producing parts of the dimmer. AC lighting loads only. Load out Line In (hot) High-voltage connections 350 µS Choke Mounting points FIG. 1 RDA-CKM RDA-CKM UL and C-UL Ratings: Input: · 120 VAC, 50/60 Hz, 2400 W · 240-277 VAC, 50/60 Hz, 2400 W Specifications: · · · · · · · · · · Dimensions (HW): 10. 0" x 2. 75" (254. 00 mm x 69. 85 mm) Use wires rated at 75°C (167°F) Torque terminals to 7 in-lbs (0. 8 N/M) Max. wire size: 10 AWG (4 mm²) Wire stripping length: 0. 28" (7 mm) Weight: 6. 5 lbs (2. 95 kg) BTU/hr: 300 Incandescent Low-voltage Neon, cold-cathode Suggested Loads: Lighting Application Drawings Method A 120 VAC, 1Ø / External choke, line side configuration FIG. 2 Method A AMX Corporation reserves the right to alter specifications without notice at any time. For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s). AMX Corporation reserves the right to alter specifications without notice at any time. [. . . ] 3000 research drive, richardson, TX 75082 USA · 469. 624. 8000 · 800. 222. 0193 · fax 469. 624. 7153 · technical support 800. 932. 6993 [. . . ]