User manual AMX ABS AXLINK BUS STRIP

[. . . ] instruction manual ABS AXlink Bus Strip C on t ro l S y s t em A c c e s s or ie s AMX Limited Warranty and Disclaimer AMX Corporation warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX Corporation, with the following exceptions: · · · · · Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. Disk drive mechanisms, pan/tilt heads, power supplies, MX Series products, and KC Series products are warranted for a period of one (1) year. Unless otherwise specified, OEM and custom products are warranted for a period of one (1) year. [. . . ] Some states do not allow the limitation or exclusion of incidental or consequential damages for consumer products. In such states, the limitation or exclusion of the Limited Warranty may not apply. The owner is advised to consult applicable state laws for full determination of rights. EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, AMX CORPORATION MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AMX CORPORATION EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY. Table of Contents Table of Contents Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparing/connecting captive wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ABS AXlink Bus Strip i Table of Contents ii ABS AXlink Bus Strip Product Information Product Information The ABS AXlink Bus Strip (FIG. 1) is a 10-connector AXlink terminal strip designed to simplify connecting multiple AXlink devices in an AMX Control System. Use the included double-sided tape to securely affix the unit to the surface. FIG. 1 ABS Axlink Bus Strip Specifications The following table lists the specifications for the ABS Axlink Bus Strip. Specifications Power Connectors LED Enclosure Dimensions (HWD) Weight Mounting Options 12 VDC, 7 A max. Ten - 4-pin, captive-wire AXlink connectors One - 2-pin, captive-wire power connector Power indicator (Red) Metal with black matte finish 1. 14" x 12. 00" x 1. 27" (2. 90 cm x 30. 48 cm x 3. 23 cm) 6. 70 oz (189. 94 g) 4" double-sided foam tape ABS AXlink Bus Strip 1 Product Information 2 ABS AXlink Bus Strip Installation and Wiring Installation and Wiring Wiring Guidelines To determine the maximum distance allowed per gauge, use the following formula and refer to the table below: 1. 5/(Power Consumption x Resistance x 2) = Distance (feet) Wiring Guidelines Gauge 18 AWG 20 AWG 22 AWG 24 AWG Resistance . 00639 . 0101 . 0162 . 0257 The maximum wiring lengths are based on a minimum of 13. 5 volts available to the ABS. Preparing/connecting captive wires 1. Insert each wire into the appropriate opening on the connector according to the wiring diagrams and connector types described in this section. [. . . ] 2 ABS wiring diagram If the AXlink devices have local power supplies, do not connect to the power terminal of the ABS via the PWR+ (Red). For additional information about the wiring distances between the ABS and a specific AXlink device, refer to the appropriate manual. 4 ABS AXlink Bus Strip Installation and Wiring ABS AXlink Bus Strip 5 AMX reserves the right to alter specifications without notice at any time. brussels · dallas · los angeles · mexico city · philadelphia · shanghai · singapore · tampa · toronto · york 3000 research drive, richardson, TX 75082 USA · 469. 624. 8000 · 800. 222. 0193 · fax 469. 624. 7153 · technical support 800. 932. 6993 041-004-1561 8/01 ©2001 AMX Corporation. AMX, the AMX logo, the building icon, the home icon, and the light bulb icon are all trademarks of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. [. . . ]