User manual AMICA 1053.3X

[. . . ] After reading the instruction manual, operating the oven will be easy. Before being packaged and leaving the manufacturer, the oven was thoroughly checked with regard to safety and functionality. Before using the appliance, please read the instruction manual carefully. By following these instructions carefully you will be able to avoid any problems in using the appliance. [. . . ] The electronic prgrammer is equipped with electronic sensors which are switched on by touching or pressing the sensor surface for at least one second. The timer can be activated at any time, regardless of the status of other functions. The timer can be set for from 1 minute to up to 23 hours and 59 minutes. To set the timer you should: After connection to the mains or reconnection after a power cut the display shows flash Set the timer using sensors 3 and 2. Press sensor 1, 2 or 3 in order to switch off the signal, the signal function will go out and the display will show the current time. If the alarm signal is not turned off manually, it will be turned off automatically after approx. If the correct time is not set then proper operation of the oven is not possible. If the oven is to be switched off at a given time, then you should: Set the oven function knob and the temperature regulator knob to the setting at which you want the oven to operate. If the oven is to be switched on for a specified period of time and switched off at a fixed hour then you should set the operation time and the operation end time: Set the required time using sensors 3 and 2, within a range from 1 minute to 10 hours. Set the required time using the sensors 3 and 2 within a range from 1 minute to 10 hours. When the set time has passed the oven is switched off automatically, the alarm signal is activated and the signal function AUTO flashing again; Set the oven function knob and the temperature regulator knob to the switched­off position. Press sensor 1, 2 or 3 in order to switch off the signal; the signal function will go out and the display will show the current time. In ovens equipped with one control knob, the oven function knob is integrated with the temperature regulator knob. Set the switch­off time (operation end time) using sensors 3 and 2, which is limited to a period of 23 hours and 59 minutes from the current time. Set the oven function knob and the temperature regulator knob to the setting at which you want the oven to operate. The function AUTO is now on; the oven will start operating from the point when the difference between the set operation end time and the operation duration time occurs (e. The operation time is set to 1hour, the operation end time is set to 14. When the oven reaches the operation end time it will switch off automatically, the alarm will be activated and the function AUTO will start flashing again. The tone of the timer beeps may be changed as follows: Press sensors 2 and 3 simultaneously, select "tone" function with the 1 sensor, the display panel will start to blink: Set the oven function knob and the temperature regulator knob to the switched­off position. Press sensor 1, 2 or 3 in order to switch off the alarm; the function AUTO will go out and the display will show the current time. With the 2 sensor press the appropriate Sensors from 1 to 3 to select the option you wish. Oven with automatic air circulation (including a fan and an ultra-fan heater) The oven can be heated up using the bottom and top heaters, the grill or the ultra-fan heater. [. . . ] After washing the guides, put them in the mounting holes of the oven and press the catches (Z1 and Z2). Dismounting the side racks Ovens types marked with the letters Dp* in the model number have moveable stainless telescopic runners attached to the side racks. Before putting trays on the telescopic runners they should be pulled out (if the oven is warmed up the runners should be pulled out by hooking the back edge of trays on the bumpers in the front part of the telescopic runners) and then insert them together with a tray. In order to obtain easier access to the oven chamber for cleaning, it is possible to remove the door. [. . . ]