User manual AMERICAN CLASSIC SEATPOST INSTALLATION INSTRUCTIONS

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AMERICAN CLASSIC SEATPOST. We hope that this AMERICAN CLASSIC SEATPOST user guide will be useful to you.

AMERICAN CLASSIC SEATPOST INSTALLATION INSTRUCTIONS: Download the complete user guide (227 Ko)

You may also download the following manuals related to this product:

AMERICAN CLASSIC SEATPOST INSTALLATION (523 ko)

Manual abstract: user guide AMERICAN CLASSIC SEATPOSTINSTALLATION INSTRUCTIONS

Detailed instructions for use are in the User's Guide.

 [. . . ]  [. . . ] Tools Needed: Torque wrench with 4mm hex key. 
1 2

Step 1: With the saddle resting top side down,  position the cradle plate as shown on the rails. 
3

Step 2: Position the two lower clamps as shown. The clamps rest on the cradle plate and rails. 
4

Step 3: Press the top of the seatpost down into position while sliding the 2 lower clamp pieces into place. 
5

Step 4: While holding the lower clamp pieces in place,  install the 4mm hex bolt (lightly greased). Step 5: Install the seatpost in the bike and then micro adjust accordingly. NOTE: Always remember to keep bolt,  threads and surface contact points clean.  [. . . ]  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AMERICAN CLASSIC SEATPOST

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AMERICAN CLASSIC SEATPOST will begin.