User manual ALTEC LANSING VS2621

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. [. . . ] To Search for a Station Quickly (Auto Search) Keep " " or " " button pressed until the tuner starts searching for a station. · The Auto Search may not stop at stations with very weak signals unless the " " or " " button is pressed. -8- Presetting Radio Channel You can tune into a stored channel directly by entering the preset number. Press " " or " " button to tune into a desired station. Press " " button until "CH 01" appears on the display, then press " " or " " button select a desired channel. Repeat steps 1 to 3 to preset other stations. VOL VOL Tuning into a Preset Channel 1. Press " M " button until "PRESET" appears on the display. Press " " or " " button to select a preset channel and the channel number appears on the display, then it will operate automatically. Press " M " button once and the "MANUAL" appears on the display, then press " " button to exit the preset channel. VOL VOL VOL Auto Search and Store FM Stations 1. Press and hold "M" button until the tuner starts searching for a station. After tuning into a station, the station will be stored to the preset channel "CH 01" automatically. Then it will automatically continue to search and store other stations (up to 20 channels "CH 20"). -9- TO Delete the Preset Channel 1. Press " + " or " - " button in RPT_MODE until "RPT ALL"appears on the display. · All tracks will be played repeatedly. RPT 1 (Repeat one) 1. Press " + " or " - " button in RPT_MODE until "RPT 1" appears on the display. · To select the desired track to be played repeatedly by pressing " " or " " button. -14- MEMORY USAGE In standby or pause mode, press " M " button until MEMORY USAGE appears on the display. · The total memory and free memory appear on the display. FREE VOL DELETE FILE Delete All Files In standby or pause mode, press "M" button until the "DELETE ALL FILE" appears on the display. Then press " " button to delete all tracks of the current folder (The folder name can not be deleted). · All tracks of the current folder will be deleted " button when "IF YES, if you press " PLAY KEY" appears on the display. · After all tracks of the current folder are deleted, the message "NO FILE" will appear on the display. · Press "M" button to return to current folder (such as Folder 0001), then press " " button to enter and select the "F UP_DIR" to return to previous folder. · If all tracks of the root directory are deleted, the message "NO FILE" will always appear on the display when you turn on the unit each time. · Press "M" button to return to "FOLDER ROOT" mode, and press " " button to enter, then select other folders. -15- Delete One In standby mode, press and hold "M" button to delete the track you want to delete in the current folder. [. . . ] · The MP3 player will be formatted if you press " " button when "IF YES, PLAY KEY" appears on the display. · After format, all files and folders will be deleted. EXIT In standby or pause mode, press "M" button until "EXIT" appears on the display. Then press " " button to exit Menu function. TIMER FUNCTION For registering the time of track playback or radio reception. · During track playback or radio reception, press and hold "TIMERRESET" button until "00:00:00" appears on the display. [. . . ]