User manual ALTEC LANSING MR945A HF HORN

[. . . ] Because the following instructions cover various models, the characteristics of your refrigerator may differ slightly from the refrigerator described in this manual. If you have any question, contact us at 1-800-ALTEC LANSING or find help and information online at www. CRITICAL INSTALLATION WARNING WARNINGS • Do not install the refrigerator in a damp place or place where it may come in contact with water. - Deteriorated insulation of electrical parts may cause an electric shock or fire. [. . . ] ( 4 ) Lighting/ Hold 3 sec for C↔F Touching this button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously. If you want the Dispenser lamp to come on only when some one uses the dispenser, touch this button to turn the continuous mode off. Touch and hold this button for 3 seconds to switch the temperature units between °C and °F. You can set the temperature between 34°F and 46°F (between 7°C and 1°C). Touch and hold this button for 3 seconds to decrease the time needed to cool products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the door was left open). Also, pressing this button for 3 seconds turns on Child Lock which locks the display panel and dispenser buttons so the buttons can not be used. The Child Lock icon lights up to indicate you’ve activated the Child Lock function. ( 2 ) Freezer (Hold 3 sec for Power Freeze) ( 5 ) Fridge (Hold 3sec for Power Cool) ( 3 ) Alarm / hold 3 sec for Filter Reset ( 6 ) Ice Off (Hold 3 sec for child lock) ( 7 ) Ice Type (Cubed) (Crushed) ( 8 ) Water Water operating _11 DA68-02488A. 12 4:38:34 PM Cooling Off Mode Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold. € To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ). € If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve. 12 4:38:35 PM • The locked symbol should be lined up with the indicator line. ) If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa): • Check to see whether the sediment filter in the reverse osmosis system is blocked. € Allow the storage tank on the reverse osmosis system to refill after heavy usage. € If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. If you have questions about your water pressure, call a licensed, qualified plumber. Touch the "Alarm/hold 3 sec for Filter Reset" button ( (Filter Reset) ) for about 3 seconds to reset the water filter. The color of ) changes from red indicator ( to blue, green, or yellow. For a replacement water filter, you can visit your local home Improvement center or contact the Samsung Parts distributor. Be sure the replacement water filter has the ALTEC LANSING logo on the box and on the water filter. [. . . ] All replaced parts and products become the property of Samsung and must be returned to Samsung. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. In-home service will be provided during the warranty labor period subject to availability within the contiguous United States. To receive in-home service, the product must be unobstructed and accessible from floor level to service personnel. [. . . ]