User manual ALTEC LANSING DTS-640 SPEAKER SYSTEM

[. . . ] Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association. Ownership of all other trademarks is attributed to their due owner. TruSurround XT, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Before Using the Product 2 Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. [. . . ] Magicinfo only functions on products that have the MagicInfo function. TV mode is only available on products that have the TV function. Maintenance Click "Maintenance" to configure preferences. Maintenance settings can be configured for all the connected input sources. Lamp Control 1 2 1 Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Auto Lamp Control Adjust the backlight for the selected display at a specified time. Configuring the settings for Auto Lamp Control will automatically disable Manual Lamp Control. Manual Lamp Control Manually adjust the backlight for the selected display. Configuring the settings for Manual Lamp Control will automatically disable Auto Lamp Control. Auto Lamp Control and Manual Lamp Control will only be enabled when User Control Mode is selected in the Lamp Control menu. 3 Using MDC 86 3 2 Using MDC Ambient Light Not available on this product. Ambient Light detects ambient light intensity and automatically adjusts the screen brightness. Ambient Brightness Mode should be selected in the Lamp Control menu to use Ambient Light. Enable or disable Ambient Light for the selected display. Changes will only be applied to the displays that are turned on. Ambient Light is only compatible with models that are equipped with an automatic brightness sensor. When one display is selected: Settings for the selected display are displayed. in sequence of ID 1 and 3): The settings for ID 1 are displayed before the settings for ID 3. When the All+Select checkbox is checked and all displays are selected: The default settings are displayed. 3 Using MDC 93 4 Screen Adjustment Configure the Picture settings (Brightness, Color Tone, etc. ). The layout of the Picture menu options may vary depending on the product. The available options in the Picture menu depend on the selected input source and the settings in Edit Name. (Refer to page 61 for details about Edit Name. ) To use TV, connect a TV tuner box to the product. Refer to page 59 for details about connecting to a TV. 4. 1 Mode Select a picture mode (Mode) suitable for the environment where the product will be used. This option is available when Dynamic Contrast is set to Off. (Refer to page 112 for details about Dynamic Contrast) 4. 1. 1 Changing the Picture Mode This product can only be controlled by using the remote control. 1 2 3 Press MENU on the remote control. Press Press / / to move to Picture and press [ to move to Mode and press [ ]. ]. Different Mode options are displayed depending on the current input source: If the input source is PC or DVI: Mode Information Advertisement Custom Move Enter Return Information: This mode reduces eye fatigue and is suitable for displaying information to the public. Advertisement: This mode is suitable for displaying video content and indoor/outdoor advertisements. Custom: Customize Contrast and Brightness as required. 1 Press / to move to the option you want and press [ ]. The selected option will be applied. 4 Screen Adjustment 94 4 Screen Adjustment If the input source is AV, Component or TV: Mode Dynamic Standard Movie Custom Move Enter Return Dynamic: This mode is suitable when the ambient light is bright. [. . . ] Regular Color Change Type 1 Type 2 FLIGHT OZ348 UA102 Use 2 colors TIME 20:30 21:10 FLIGHT OZ348 UA102 TIME 20:30 21:10 Switch between 2 colors every 30 minutes as shown above. Avoid combinations of a text color and background color of contrasting brightness. Avoid using colors of contrasting brightness (black and white; grey). FLIGHT : TIME OZ348 : 20:30 Regular Text Color Change FLIGHT : TIME OZ348 : 20:30 Use bright colors of similar brightness. Interval: Change text color and background color every 30 minutes FLIGHT : TIME OZ348 : 20:30 FLIGHT : TIME OZ348 : 20:30 FLIGHT : TIME OZ348 : 20:30 FLIGHT : TIME OZ348 : 20:30 Move and change text every 30 minutes as shown below. FLIGHT OZ348 : TIME : 20:30 FLIGHT OZ348 : TIME : 20:30 [ Step 1 ] [ Step 2 ] [ Step 3 ] Regularly display a moving image along with a logo. Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours. Appendix 164 Appendix The best way to protect the monitor from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. [. . . ]