User manual ALTEC LANSING 850-8A SPEAKER SYSTEM

[. . . ] Indb 1 2012-02-23 1:49:44 A detailed User’s Manual is built into your TV. Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances. Important Warranty Information Regarding Wide screen format PDP Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to fill the screen, if your model offers this feature, with the images constantly in motion. [. . . ] œ✎ If the connection fails, select Previous, repeat Step 1 and 2, carefully re-enter your security key or WPS PIN, then repeat Steps 3 and 4. If it fails again, select Next on the “Connection Failed” screen, and then go to 6 - Auto Program (1) on the next page. Configure your network later through Network Settings in the TV’s Menu. For more information, refer to “Setting up the Wired or Wireless Network” in the e-Manual or see the Network Connection sections in this manual (pages 13 and 25). 3b Wired Network The TV checks the network connection, then displays the You are connected to the Internet. If you have any problems using online services, please contact your Internet Service Provider. Indb 18 2012-02-23 1:49:54 4 Software Upgrade: Update the software to the latest version ✎✎ To update later, select Skip. When Network Settings is complete, your TV will check for a new software version automatically. If new software is available, the TV downloads and installs the new software. For more information, refer to Software Update (Preference Features → Support Menu) in the e-Manual. œ✎ You can only upgrade software if your TV has an active network connection. œ✎ If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI1/DVI in Edit Name. œ✎ If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to HDMI1/DVI in Edit Name. œ✎ If you connect an AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI Devices to HDMI1/DVI in Edit Name. Information You can see detailed information about the selected external device. Refresh If the external devices are not displayed in the Source list, open the Tools menu, select Refresh, and then search for the connected devices. œ✎ Alternatively, you can refresh the Source list by pressing the a button on your remote. Indb 21 2012-02-23 1:49:56 How to Navigate Menus Your TV’s Main and Tools menus contains functions that let you control the TV’s features. For example, in the Main menu you can change the size and configuration of the picture, its brightness, its contrast and so on. There are also functions that let you control the TV’s sound, channel configuration, energy use, and a host of other features. To access the main, on-screen menu, press the MENUm button on your remote. Tools menus are available when the TOOLST menu Icon is displayed on the bottom right of the screen The illustration below displays the buttons on the remote you use to navigate the menus and select and adjust different functions. [. . . ] tV-Holder (BN96-15753A) Screw (M8 X L19) Installing the TV-Holder 1. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included in the TV-Holder Kit that is designated for your TV. Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed. œ✎ If you fasten the screw to the wall, we recommend you drive the screw into a stud. [. . . ]