User manual ALTEC LANSING 802D HF DRIVERS

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ENGLISH 802D HF DRIVERS TU-GD10U-T IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. [. . . ] The card may malfunction. Deleting all still image files After setting the files you want to protect, press RETURN to return to MENU. NOTE You cannot delete a protected file on the card. 1 2 3 4 Repeat steps 1 to 4 in Setting Slide Show. Press a/b to select "File Operation", and then press ENTER. Press c/d to select "Yes", and then press ENTER. NOTE You cannot delete a protected file on the card. The card may malfunction. 50 Using memory card Displaying a motion picture 1 Press CARD and the card mode screen displays. Press a/b/c/d to select the file you want to play, and then press ENTER. Video playback starts. 2 3 4 Press CARD again to display the operation panel. See page 46 for the operation panel information. When viewing a motion picture, by pressing VIEW MODE the picture size changes. Small Medium Large. Recording a motion picture Use this setting to record images you are currently watching. Mode Use this setting for recording images you are currently watching. You can select the recording mode (picture quality) for a motion picture. 1 1 Press REC to start recording. CARD indicator lights up red. Recording information displays in the lower right corner of the screen. Press CARD and the card mode screen displays. Press MENU and the MENU screen displays. 2 3 2 Press H to stop recording. Press c/d to select "Card Setup". NOTE The input signals available for recording are S-Video and Composite Video, except for copy-guarded or V-chip blocked programs. 4 5 Press a/b to select "Video Setup" and then press ENTER. Mode Pre Record Repeat Play SP LP EP To display the remaining record time. Press DISPLAY while not recording. Remaining record time displays in the lower right corner of the screen. NOTE Do not remove the AC cord from the socket. Input Select] Auto COMPONENT VIDEO The setting is stored and can be selected on the "INPUT SOURCE" menu. CAUTION To protect all equipment, always turn off the TV before connecting to a DVD player, VCR, Digital TV tuner, PC, HDMI equipment, game console, camcorder or other external equipment. NOTE See pages 55 to 60 for external equipment connection. Please refer to the relevant operation manual (DVD player, PC, etc. ) carefully before making connections. Refer to your external equipment operation manual for the signal type. 54 Using external equipment Connecting a DVD player You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting to a DVD player and other audiovisual equipment. AVC System (rear view) Component video cable (commercially available) Audio cable (commercially available) DVD player When using composite cable. AVC System (rear view) AV cable (commercially available) DVD player When using DVI cable. (INPUT 5) AVC System (rear view) 3. 5mm stereo minijack cable (commercially available) DVI cable (Commercially available) NOTE See page 58 for connecting a DVD player with HDMI terminal. DVD player 55 Using external equipment Connecting a VCR You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment. AVC System (rear view) AV cable (commercially available) VCR Connecting a game console or camcorder A game console, camcorder and some other audiovisual equipment are conveniently connected using the INPUT 3 terminals. NOTE The S-video terminal has priority over the video terminals. AVC System (front view) AV cable (commercially available) S-video cable (commercially available) Game console/Camcorder 56 Using external equipment Connecting a Digital TV STB (Air or Cable) You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting a Digital TV STB (Air or Cable) and other audiovisual equipment. NOTE If your cable-TV company has CableCARD available, you can also use the CableCARD to receive HDTV programs. (See page 29. ) When using component cable. AVC System (rear view) Component video cable (commercially available) Audio cable (commercially available) When using composite cable. AVC System (rear view) Digital TV STB AV cable (commercially available) When using DVI cable. (INPUT 5) Digital TV STB AVC System (rear view) 3. 5mm stereo minijack cable (commercially available) DVI cable (Commercially available) NOTE See page 58 for connecting a Digital TV STB with HDMI terminal. Digital TV STB 57 Using external equipment Connecting HDMI equipment Please use the INPUT 4 terminal when connecting HDMI equipment. HDMI equipment HDMI cable (Commercially available) AVC System (rear view) Displaying an image from HDMI equipment 1 To watch an HDMI equipment image, select "INPUT4" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the Display. (See page 70. ) 5 6 Press a/b to select the desired item and press ENTER. [. . . ] Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. [. . . ]