User manual ALTEC LANSING 619-8A CEILING SPEAKER

[. . . ] Under no circumstances should the cut-off plug be inserted elsewhere into a 5A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: · The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. ⷠThe wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug. [. . . ] If you select 1000 KHz, the Tv will perform search process in a detailed way. If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial TV broadcasts. Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. After auto channel scan type is set and selected and confirmed, installation process will start and progress bar will move along. After all the available stations are stored, Channel List will be displayed on the screen. If you like the sort channels, according to the LCN, please select "Yes" and than press "OK". ⷠSelect Manual Channel Scan from the Installation menu by using " "/" " and OK buttons. Use " "/" " button to highlight an item and then press " " or " " button to set an option. You can select options by using " "/" " and OK buttons. In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. After selecting search type as Digital Aerial, you can enter the multiplex or frequency number using the numeric buttons and press OK button to search. You can select a broadcast type option from the list by using " " /" " and OK buttons. If the name and time of the programme are not available, then information banner will be displayed with blanks. If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel (default code is 0000). Note: If the Country option is set to France, you can use 4725 as the default code. If the USB stick is not recognized after power off/on or First Time Installation, first, plug the USB device out and power off/on the TV set. To display Media Browser window, press either "MENU" button on the remote control and then select Media Browser by pressing " " or " " button. To display specific types of broadcast, you should use Active channel list setting. Select Active channel list from the Channel list menu by using " " or " " button. You can play music, picture and video files from the connected USB memory stick. When you select Videos from the main options, available video files will be filtered and listed on this screen. You can use " " or " " button to select a video file and press OK button to play a video. [. . . ] USB Is too Slow: If "USB is too slow" message is displayed on the screen while starting a recording, try restarting the recording. If you still get the same error, it is possible that your USB disk does not meet the speed requirements. The following table is an illustration of some of the typical video display modes. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen. [. . . ]