User manual ALTEC LANSING 311-60 HF HORN

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ALTEC LANSING 311-60 HF HORN. We hope that this ALTEC LANSING 311-60 HF HORN user guide will be useful to you.


ALTEC LANSING 311-60 HF HORN : Download the complete user guide (1844 Ko)

Manual abstract: user guide ALTEC LANSING 311-60 HF HORN

Detailed instructions for use are in the User's Guide.

[. . . ] Ventilation -- The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings. Heat -- The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. Power Sources -- The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. [. . . ] This warranty is the exclusive and only warranty in effect relative to Altec Lansing PC audio, TV or gaming speaker systems and any other warranties, either expressed or implied, are invalid. reseller is responsible for any incidental damages incurred in the use of the speakers. (This limitation of incidental or consequential damage is not applicable where prohibited. ) Altec Lansing Technologies, Inc. 's obligation under this warranty does not apply to any defect, malfunction or failure as a result of misuse, abuse, improper installation, use with faulty or improper equipment or the use of the speaker systems with any equipment for which they were not intended. The terms of this warranty apply only to PC audio, TV or gaming speaker systems when such speakers are returned to the respective authorized Altec Lansing Technologies, Inc. reseller where they were purchased. Under the terms of this warranty, the original consumer purchaser has certain legal rights and may have other rights, which vary worldwide. 1 311-60 HF HORN WELCOME Video Gaming & TV PRIMARY INPUTS The primary input jacks are located on the subwoofer. Using the supplied RCA cable, connect any audio source that has red (right) and white (left) RCA output jacks to the 311-60 HF HORN's red (right) and white (left) RCA input jacks. In some setup configurations, you may use the supplied composite video (yellow) RCA extender cable to allow increased separation between the TV and subwoofer. Note: For the clearest sound, try muting your TV's speakers when using the TV as an audio source. Master Control The knob on the wired controller is the master volume control for the speaker system. Turn the knob clockwise to increase the volume and counter-clockwise to decrease the volume. Audio Speaker System Welcome to the extraordinary world of Altec Lansing high-fidelity sound. The 311-60 HF HORN is a 2. 1 analog system that blows away the lame speakers inside your TV. Plus, with a bass EQ mode selector, you'll feel the rumble of your favorite games and movies. Great television sound isn't all you'll experience with the 311-60 HF HORN system. To ensure first-time operation as expected, please carefully follow the connection sequence described below. SATELLITE SPEAKERS To set-up the 311-60 HF HORN system, plug the right satellite's orange connector into the "RIGHT" output on the rear of the subwoofer and the left satellite's brown connector into the "LEFT" output on the rear of the subwoofer. WIRED CONTROLLER Connect the grey-colored DIN connector from the wired controller into the grey "CONTROLLER" jack on the rear of the subwoofer. For easy insertion of the DIN connector, the arrow on the connector must face up. For your convenience, the wired controller lets you power the system on or off, control the volume and adjust bass equalization (EQ) (TV, Gaming or Max-Bass). Power Press the "Power" button on the wired controller to turn on the speaker system. A green EQ LED on the wired controller will illuminate, indicating power is on. Push the "Power" button again to turn off the system. EQ Mode Press the "EQ Mode" selector button to cycle through the three modes of bass equalization: TV, Gaming and Max-Bass. TV: This setting provides normal bass response that you would expect from standard TV programming. Gaming: The Gaming setting boosts the bass level to highlight the low frequency sounds of video gaming. Max-Bass: Just as the name implies, Max-Bass supplies even more bass for the most intense gaming experience. 2 3 TROUBLESHOOTING TIPS SYMPTOM Can't insert the wired controller's DIN connector into the subwoofer. [. . . ] Surge protector (if used) isn't powered on. Press the Power button on the wired controller. Disconnect and then reconnect the power adapter to both the wall outlet and the subwoofer. If the power adapter is plugged into a surge protector, make sure the surge protector is switched on. Connect the wired controller to the subwoofer. Plug another device into the same jack on the wall outlet to ensure the outlet is working. Wired controller isn't connected to the subwoofer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ALTEC LANSING 311-60 HF HORN




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ALTEC LANSING 311-60 HF HORN will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.