User manual ALPINE VPE-S431

[. . . ] 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave. , Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-0000 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U. K. [. . . ] Failure to take such precautions may result in fire. DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc. DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage. 1-EN Feature This unit is designed to connect to the IVA-D300 series to expand their functions. In addition, when this unit is not connected to the IVA-D300 series, it can perform visual effects, switch video output to a rear monitor connected to this unit, etc. a Operations can be performed from the IVA-D300 series when connected. a Operations can be performed from the touch panel monitor when connected. For details, refer to the Owner's Manual of the touch panel monitor. 2 Press the REAR SEL 1 or the REAR SEL 2 switch to select an item from the list below. AUX-1 AUX-2 AUX-3 DVD PLAYER*1 VISUALIZER*2 OFF SETUP RETURN *1 Displayed only when the IVA-D300 series are connected. When the IVA-D300 series are connected, this is displayed only when VISUALIZER is set to ON in the IVA-D300 series. · The AUX NAME set in "SETUP" is displayed for AUX-1, 2 or 3. 3 Press and hold the REAR SEL 1 or the REAR SEL 2 switch for more than 2 seconds. The selected source is displayed on the monitor. · When RETURN is selected, the display returns to the one prior to the SOURCE SEL. Operation This unit can be operated by connecting REAR SEL1 and REAR SEL 2 leads to a push switch (sold separately). For details, consult an authorized ALPINE dealer. REAR SEL 1, 2 leads OK SETUP Each setting can be performed by the procedure shown below. · When IVA-D300 series is connected, the VISEAL EFFECT, VISUALIZER and AUX IN-1, 2, 3 NAME cannot be set in this unit. Set these functions in the IVA-D300 series. Body of your car Push switch, etc. · Use a switch (sold separately) which has an automatic return function to connect with REAR SEL 1, 2 leads. · When operating with the Monitor Control 1, 2 leads, connect to a switch (sold separately) as well. (Refer to "SWITCHING THE REMOTE SENSOR" page 3. ) 1 2 3 4 Press the REAR SEL 1 or the REAR SEL 2 switch. The SOURCE SEL. display appears. Press the REAR SEL 1 or the REAR SEL 2 switch to change the setting item. Press and hold the REAR SEL 1 or the REAR SEL 2 switch for more than 2 seconds. The SETUP display appears. Switching the Output Source Video output from AUX OUT 1/2 for each monitor can be switched. 1 Press the REAR SEL 1 or the REAR SEL 2 switch. The SOURCE SEL. display appears. Press the REAR SEL 1 or the REAR SEL 2 switch to select the desired setting item. VISUAL EFFECT VISUALIZER AUX IN-1, 2, 3 SIGNAL AUX IN-1, 2, 3 NAME RETURN SOURCE SEL. AUX-1 AUX-2 AUX-3 DVD PLAYER VISUALIZER OFF SETUP RETURN 5 6 Press and hold the REAR SEL 1 or the REAR SEL 2 switch for more than 2 seconds to change the setting. After settings, press the REAR SEL 1 or the REAR SEL 2 switch to select RETURN, and press and hold the switch for more than 2 seconds. The SOURCE SEL. [. . . ] · To connect with IVA-D300 series, some settings are necessary in IVA-D300 series. Refer to the operating instructions of IVA-D300 series for details. *1 For details about connection to a DVD changer, refer to the Owner's Manuals of the DVD changer and the IVA-D300 series. *2 Navigation (if connected to IVA-D300 series) picture and sounds can be output to the rear monitor. Set AUX IN-3 NAME to "NAV. " *3 If IVA-D300 series is connected, remove the head unit connector cover. [. . . ]