User manual ALPINE UTE 81R

[. . . ] 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Tel. : (03) 9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7-11 40878 Ratingen, Germany Tel. : 02102-45 50 ALPINE ITALIA S. p. A. Colombo 8, 20090 Trezzano Sul Naviglio MI, Italy Tel. : 02-48 47 81 ALPINE ELECTRONICS FRANCE S. A. R. L. 50016 F-95945, Roissy, Charles De Gaulle Cedex, France Tel. : 01-48 63 89 89 ALPINE ELECTRONICS OF U. K. , LTD. 2-6-34, Takashima, Nishi-ku, Yokohama, Kanagawa, Japan Designed by ALPINE Japan Printed in Japan (Y) 68P41262Y50-O CD changer for IVA-C801/ UTE 81R. [. . . ] Rotate the rotary encoder clockwise or counterclockwise to select the frequency that you wish to adjust. Repeat the above steps to adjust other frequencies. 5 Press the FUNC (RETURN) when your selection has been made. The display returns to the Audio Processor List screen. Tip When the FUNC (RETURN) button is pressed, the display returns to the previous screen. 6 When the adjustments have been completed, press the FUNC (RETURN) button. The display changes to the Equalizer mode screen. 28-EN Adjusting Surround Levels and Surround Delay Time If your equalizer connected is equipped with the surround level/time adjustment feature, you can adjust the surround sound levels and surround delay time to suit to your preference. Selecting DHE (Digital Harmonic Enhancer) Mode The DHE mode enhances the sound of musical instruments or vocals, while masking road noises of a moving vehicle. The result is music with more clarity. 1 2 3 Display the surround mode screen and press one of the Function buttons 2 (STADIUM) through 6 (HALL) (except "NORMAL") that has the surround mode you wish to adjust. Press the rotary encoder to select the surround delay time or surround level that you wish to adjust. Each press toggles between the surround delay time and surround level modes. Turn the rotary encoder clockwise or counterclockwise to adjust the surround sound level or delay time to your preference. The display returns to the Surround mode screen. 1 2 3 4 Press the SOURCE button. Press the 4 (A. PROC) button to display the Audio Processor List screen. Rotate the rotary encoder and select "DHE, " then press the rotary encoder to execute the selection. The display returns to the BBE mode screen. 5 Selecting Listening Position You can select the listening position for optimum sound field depending on the number of passengers in the vehicle. 1 2 3 Press the SOURCE button. Press the Function button 2 (ALL) through 5 (FRONT/RIGHT) that has your desired listening position. NOTES · The black squares show the listening positions. mode is deactivated. 4 5 When selection has been completed, press the FUNC (RETURN) button. The display returns to the Audio Processor List screen. Tip When the FUNC (RETURN) button is pressed, the display returns to the previous screen. 31-EN Audio Processor Operation (Optional) (IVA-C801) (UTE 81R) 12 46 FUNC 12 46 FUNC SOURCE SOURCE Rotary encoder Rotary encoder Adjustment of Time Correction Value Adjusting Cross-Over (X-Over) Point of 2-Way Divider If an optional Alpine Channel Divider PRA-H400 is connected, you can control the Divider from the IVA-C801/UTE 81R. Use this procedure when one or two 2-waysystem or 3-way system channel dividers are connected. 1 2 3 Press the SOURCE button. Rotate the rotary encoder and select the "TimeCorr. " (Time-Correction), then press the rotary encoder. Press the rotary encoder repeatedly to select the position (seat) you wish to adjust. Each press changes the seat positions as follows: Fr/Left Fr/Righ Rear/Left Rear/Right 1 2 3 Press the SOURCE button. Rotate the rotary encoder and select the "Divider" (when one divider is connected) or "Divider-F and Divider-R" (when two dividers are connected), then press the rotary encoder to execute the selection. The mode changes to the Cross-Over Adjustment mode. 4 5 4 5 6 7 Rotate the rotary encoder clockwise or counterclockwise to increase or decrease the Time-Correction value respectively to your desired value. The display returns to the Time-Correction mode screen. Tip When the FUNC (RETURN) button is pressed, the display returns to the previous screen. 32-EN 6 Press the rotary encoder and select the channel that you wish to adjust. [. . . ] Peel off the protective paper from the adhesive side of the Velcro fasteners. Attach two pieces of the Velcro fasteners (rough textured) onto the bottom of the Tuner. Tuner Tuner Velcro Fastener 2 Attach two pieces of the Velcro fasteners (soft textured) onto the mounting location such as under the front passenger's seat etc. Mount the Tuner aligning the Velcro Fasteners. 60-EN Parking Brake Lead Connection If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc. 1 Vehicle Cable 2 Pinch Connector Pliers Monitor Cable Stopper Foot Brake Lead/Parking Brake Lead Connection FOOT BRAKE Foot brake lamp Pinch Connector Pinch Connector Foot brake lead Parking brake lamp Parking brake lead Foot brake switch Chassis Battery Parking brake switch IVA-C801/ UTE 81R TUNER (Yellow/Black) PARKING BRAKE (Yellow/Blue) Connection Diagram of SPST Switch (Sold Separately) (If the ACC power supply is not available) SPST SW (Optional) IGNITION (Red) BATTERY IVA-C801/ UTE 81R (Monitor and Tuner) (Yellow) Battery NOTE If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately). If the switched power (ignition) lead of the IVA-C801/UTE 81R is connected directly to the positive (+) post of the vehicle`s battery, the IVA-C801/UTE 81R draws some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be discharged. Cautions for handling the I/F cord The I/F cord is used to connect the monitor and the tuner BOX. [. . . ]