User manual ALPINE TDM-7554R

[. . . ] OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. When problems occur such as a lack of sound or video, foreign objects inside the unit, smoke coming out, or noxious odors, stop use immediately and contact the dealer where you bought the equipment. Operating the equipment may distract the driver from looking ahead of the vehicle and cause accident. [. . . ] English The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. Note: When the BAND button is pressed and held for more than 2 seconds while a station name is displayed, the display shows the station frequency for 5 seconds. When the RDS station signal received has become weak: · AF seek mode, press and hold the AF button for at least 2 seconds to have the unit automatically seek a stronger station in the AF list. Make sure that the Function indicator at the left side of the F button is illuminating, then press the preset location button in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. If the preset station and the stations in the AF list cannot be received: The unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. In the PTY31 ON mode, the unit will make an emergency announcement when the unit receives the PTY31 (Emergency Broadcast) signal. The display shows "T-INFO" when the Traffic Information mode is activated. press the g DN or UP f button to select your desired traffic information station. When a traffic information station is tuned in, the TP indicator lights up. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRFINFO" for 5 seconds and returns to the PS display. When traffic information broadcast is over, the unit will automatically set in the standby mode. If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the unit produces an alarming sound. ⷠIf you do not want to listen to the traffic information being received, lightly press the T. INFO mode will remain in the ON position to receive the next traffic information message. ⷠIf the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized. [. . . ] Make sure that the Function indicator at the left side of the F button illuminates, then press the Preset buttons to select the desired disc to be titled. The first character will stop blinking and the display will automatically advance to the next digit. When that digit begins to blink, you may choose the next letter or symbol of your title. Use spaces where characters are not needed (for example at the end of a 5 character title, use 3 spaces to complete the title). [. . . ]