User manual ALPINE TDA-7568R

[. . . ] OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. When problems occur such as a lack of sound or video, foreign objects inside the unit, smoke coming out, or noxious odors, stop use immediately and contact the dealer where you bought the equipment. Operating the equipment may distract the driver from looking ahead of the vehicle and cause accident. [. . . ] The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. Note: When the BAND button is pressed and held for more than 2 seconds while a station name is displayed, the display shows the station frequency for 5 seconds. When the RDS station signal received has become weak: · AF seek mode, press and hold the F1 button for at least 2 seconds to have the unit automatically seek a stronger station in the AF list. Note: You can tune in an RDS station while you are listening to cassette play. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. If the preset station and the stations in the AF list cannot be received: The unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. When a traffic information broadcast starts, the unit automatically mutes the cassette player or the regular FM broadcast. When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received, an alarm will be sounded after 1 minute. In the tape mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. Note: The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. This function allows presetting of a programme type such as music category, news, etc. You can listen to a programme in the preset programme type as the unit automatically gives priority to the preset programme type when it begins broadcasting, and interrupts the programme you are currently listening. This feature is functional when your unit is set to a mode other than the LW and MW modes. "PRIO PTY" is displayed for 2 seconds and then the program type for 5 seconds. " Note: If no button is pressed within 5 seconds after pressing the F3 button, the PRIORITY PTY mode is automatically cancelled. Press the g DN or UP f button within 5 seconds while "NEWS" is being displayed to choose a desired programme type. In the PTY31 ON mode, the unit will produce an alarming sound when the unit receives the PTY31 (Emergency Broadcast) signal. When the cassette is loaded, the player automatically starts tape playback and indicates "TAPE" in the display. [. . . ] If an optional Alpine Equalizer is connected via the Ai-NET system, their functions can be accessed from the Remote Control. PROC button repeatedly until the display show the head unit's functions. 3 -/J Button Press the button to switch between the Play and Pause modes for the tape player or CD. 7 8 Button Radio mode: Pressing the button will select, in ascending order, stations programmed into the radio's presets as shown below. [. . . ]