User manual ALPINE NVE-N055-SPACE-SERIES-SPACE-CD-ROM-SPACE-SOFTWARE

[. . . ] R DIGITAL INFORMATION MAP/CARTE ROUTIERE SUR CD ROM R SMART MAP PRO OWNER'S MANUAL Please read before using this disc. ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel. : (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. Tel. : 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF CANADA, INC. Markham, Ontario L3R 9Z6, Canada Tel. : 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF AUSTRALIA PTY. [. . . ] POINT, WAYPOINT or PREVIOUS DEST and press ENTER. When Home is selected ENTER Searching For Locations 2 The selected point is indicated by the reticule icon on the map. For home, the point menu appears. · For details on route searching, see page 42. · To return to the previous screen, press the RETURN button twice. When this button is pressed only once, the point menu will not be displayed. 3 To return to the present vehicle position, press the POS. button. 27 Searching For Locations Searching from a memory point If a memory point has already been registered, you can call it out with a simple operation. For details on the registration method, see page 35. 1 Press the MENU button to display the main menu. Select "Search" from the main menu, then select MEMORY POINT from the sub-menu and press ENTER. ENTER 2 The memory point list table is displayed. Select the memory point you wish to see and press ENTER. ENTER 3 The reticule icon appears at the selected memory point, then the point menu appears. · For details on route searching, see page 42. · To return to the previous screen, press the RETURN button twice. When this button is pressed only once, the point menu will not be displayed. 4 28 To return to the present vehicle position, press the POS. button. Searching from local points The system can display up to 6 points (max. ) of interest in a range of 6 miles (10 km) around the reticule icon such as hospitals, parking lots, petrol stations, restaurants, train stations, airports, hotels, tourist information offices, and ferries. You can search for the desired destination from these local points. 1 Display the POINT SET menu in a searching mode or pressing the LO. PT. button on the remote control (RUE-4113), and select "LOCAL POINTS" then press ENTER. ENTER Searching For Locations 2 The list for the selected local points is displayed. Select the desired local point and press ENTER. ENTER 3 The reticule icon appears at the selected local point, then the point menu appears. · For details on route searching, see page 42. · To return to the previous screen, press the RETURN button twice. When this button is pressed only once, the point menu will not be displayed. Displays the distance/ direction of the points from the present vehicle's position on the map in order of distance. 4 To return to the present vehicle position, press the POS. button. 29 Searching For Locations Auto searching for border point When you travel using two map CD ROMs, you can select automatically or manually a border point on the road as a waypoint or a destination so that the navigation system guides you to the border point. If your final destination is located in the covering area of the other CD ROM, you can select your destination via the border point as a waypoint. (For Manual Searching, see page 33. ) 1 Press the MENU button to display the main menu. Select "Route" from the main menu, the sub-menu appears. ENTER 2 Select "ROUTE PREF. " from the submenu and press ENTER. The "Select route preferences" menu appears. ENTER 3 Select "AUTO" from the "MUTI-CD" menu and press ENTER. ENTER Notes: · To select the Auto Searching for a border point, the present vehicle position and destination should be included in 2 different map areas which are adjoining each other, and the CD ROM including the destination area should be loaded. When "MANUAL" is selected, see the Manual searching for border point section on page 33. [. . . ] If one of these error messages is displayed, carefully follow the instructions in the solution column. Message Please insert map CD ROM. · There was no disc in the system when the power was switched on. · A disc was just inserted · Vibration or the like made it impossible to read the disc. · A menu selection operation was carried out while the vehicle was running. [. . . ]