User manual ALPINE MDM-7741

[. . . ] R MDM-7741 FM/AM MD Receiver · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. EN FR ES ES D. A. P RPT ALL M. I. X. F DX SEEK ST LD IT ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel. : (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] A total of 24 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, AM and D. A. P. ). NOTE If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. Automatic Memory of Station Presets 1 2 3 Press the SOURCE button to select the radio mode. Press the BAND button repeatedly until the desired radio band is displayed. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into presets 1 to 6 buttons in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. 4 8-EN Storing into Direct Access Preset (D. A. P. ) Band A combination of radio stations in any band (up to 6 stations) can be manually preset into the D. A. P. band. Tuning to Preset Stations 1 2 Press the SOURCE button to select the radio mode. band, follow the steps for the Automatic or Manual Storing of Station Presets section above. NOTE This function can be used together with the Automatic Memory Preset. 3 Press the station Preset button that has your desired radio station in memory. The display shows the band, preset number with a triangle and frequency of the station selected. To cancel the D. A. P. indicator will turn off. 9-EN MD Player Operation SOURCE -/J TITLE c SCRL RPT DN g f UP M. I. X. Disc Select buttons SCAN (1 trough 6) Normal Play and Pause Music Sensor (Skip) 1 Insert a MD. The MD player begins playback from the first track on the MD. 1 Momentarily press the DN g button once to return to the beginning of the current track. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired track. Press the f UP button once to advance to the beginning of the next track. If you wish to access the beginning of a track further ahead, press repeatedly until the desired track is reached. When an MD is already inserted, press the SOURCE button to set the mode to MD. The mode will change each time the button is pressed. NOTE Insert the MD in the direction the arrow indicates with the label facing up. NOTE The music sensor feature is functional in the play or pause mode. Fast Forward and Backward 1 2 Press the -/J button during MD play to temporarily pause the MD play. To resume the MD play, press the -/J button again. Press and hold the DN g or f UP button to quickly move backward or forward until you reach the desired section of the track. 3 Press the c (Eject) button when you want to eject the MD. NOTES · Insert only one MD at a time into the unit. · Do not pull on the MD when it is being inserted automatically into the unit. 10-EN Repeat Play To Display MD Title 1 Press the RPT(Repeat) button to play back repeatedly the track being played. Press the RPT button again and select OFF to deactivate the repeat play. NOTE If a CD Changer is connected and the RPT ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected. 1 Press the TITLE button during play back of MD. Track No. mode Playing time Clock priority mode mode TRACK Title mode DISC Title mode NOTE If no MD text nor track name has been entered, "NO TITLE" will be displayed. RPT RPT ALL OFF NOTE In case a 6-disc CD changer is connected: In CD changer mode, press the "F" button to illuminate the "F" indicator and go to step 1. 2 For title displays exceeding 8 characters, press the SCRL button. After the scrolling is completed, the unit returns to the normal mode. NOTES · Some characters may not be displayed correctly with this device, depending on the character type. [. . . ] This ensures that the unit is properly locked and will not accidentally come out from the dashboard. 2 Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin. 3 Pull the unit out, keeping it unlocked as you do so. 2 Screw Hex Nut (M5) <JAPANESE CAR> Bolt Stud Metal Mounting Strap Face Plate MDM-7741 Ground Lead Chassis Screws (M5 × 8) (Included) MDM-7741 Ground Lead Reinforce the head unit with the metal mounting strap (not supplied). [. . . ]