User manual ALPINE MDA-5051

[. . . ] Return it to your Alpine dealer or the nearest Alpine Service Station for servicing. Make sure the MDA-5051 will not be installed in a location subjected to: · Never open the Shutter (window) on the MD cartridge and touch the disc inside the cartridge. If the vehicle room is warmed up quickly, moisture condensation may form on the pickup lens preventing proper operation. [. . . ] ⷠBefore operating this unit, be sure to read the Owner's Manuals for your control unit etc. Insert an MD into one of the compartments with the label side facing up and the arrow mark toward the compartment. The compartment number ( ) indicator lights up indicating that the MD is loaded. Be sure to close the display panel after inserting MDs to protect the display panel and prevent dust/dirt from getting into the unit. To remove the MDs, first open the display panel, then press the Eject ( ) button with the compartment number (1 through 3) that contains the MD you wish to remove. Be sure to check that the compartment number indicator for the compartment is not illuminating, then insert an MD into the compartment. Attempting to insert two or more MDs into one compartment may cause damage to the unit. ⷠDo not play an MD with two or more labels attached, or with its label peeling off. The compartment number indicators for the compartments loaded with MDs will light up. Press the :/J (Play/Pause) button during MD play to place the changer in the Pause mode. the indicator · When the MD is being played or in the preparing process for play, the indicator lights up. ⷠDo not use an MD with its label peeling off or covering over the Shutter (window). Press one of the MD compartment number buttons (1 through 3) that has the desired MD. the indicator for the selected MD compartment number will be displayed. Momentarily press the g button once to return to the beginning of the current track. If you wish to access a track further back, repeatedly press until you reach the desired track. [. . . ] This compression is such that the quality of the sound approaches that of a Compact Disc. However, dust can still enter from the small gaps in the cartridge or mishandling the MD could damage the MD. If you encounter a problem, please review the items in the following checklist. [. . . ]