User manual ALPINE IVA-D300R

[. . . ] ENGLISH Contents Operating Instructions WARNING WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 DVD/Video CD Playing DVD/Video CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Displaying the Menu Operation Mode Screen (DVD only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This function could be used, for instance, to change the screen brightness while travelling at night. Setting item: DIMMER LOW LEVEL Setting content: -15 to +15 1 Touch [ ] of SCREEN ALIGNMENT. 2 Accurately touch the mark provided in the lower left corner of the screen. 3 Accurately touch the mark provided in the upper right corner of the screen. This completes adjustment, and returns to the DISPLAY setup mode screen. · If you have touched a location other than the mark, touch [RESET] to restore the adjustment screen to the initial setting. · If you touch [RETURN] on the adjustment screen, no adjustment is done and the DISPLAY setup screen is restored. You can adjust the level between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. Switching Background Textures You have a choice of 5 different background textures preset at the factory. Setting item: BACKGROUND Setting content: MODE1 to 5 · When you select a source other than the built-in disc on this unit, and the built-in disc is selected on the rear monitor connected to the unit, background textures cannot be displayed on the unit. · When an error message is displayed (ERROR, HI-TEMP, etc. ), background textures selected by this setting cannot be displayed on the unit. Setting Automatic Background Textures Turn on the Automatic Background Texture Scroll to automatically change background texture. The background texture will change each time the ignition key is turned off and turned back on again (5 textures). Setting item: AUTO BACKGROUND Setting content: OFF / ON ON: Turn on the Auto Background Texture Scroll mode. The background textures will scroll when the ignition key is turned off once and turned back on again as follows: MODE1 MODE2 MODE3 MODE4 MODE5 MODE1 OFF: Turn off the Auto Background Texture Scroll mode. Setting the Font Type You can choose a character (text and tag information, etc. ) font type for the main display. Setting item: FONT TYPE Setting content: FONT 1 / FONT 2 FONT1:Selects bold characters. FONT2:Selects round characters. 35-EN i-PersonalizeTM Media Xpander Function Setting the MX mode The Parking Brake must be engaged to access the i-Personalize mode screen. Attempting to access this screen while driving will display the warning-CAN'T OPERATE WHILE DRIVING. 6 Touch [RETURN] to return to the previous screen. · When OFF is selected, MX effect of each MX mode will be off. · Each music source, such as radio, CD and MP3 can have its own MX setting. · AUX is displayed when ON is selected in "Setting the AUX Mode" (page 33). · If the unit is connected to an audio processor with the MX function, such as PXA-H700, etc. , the MX processing can be applied to the audio processor. · This function is inoperable when Defeat is set to ON. MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise. Bass Engine Function Setting the Bass Engine The following steps 1 to 6 are common operations to each "Setting item" of bass engine Setup. Refer to each section for details. 1 2 3 4 5 Touch [SYS. ] on the source main screen. The SYSTEM selection screen is displayed. Touch [i-Personalize]. The screen changes to the i-Personalize. Touch [;] or [:] of MEDIA XPANDER to turn MX ON or OFF. OFF: MX mode is cancelled for all music sources. ON: The selected MX mode is turned on. 1 2 3 4 Touch [SYS. ] on the source main screen. The SYSTEM selection screen is displayed. After setting to ON, touch [ ]. Touch [i-Personalize]. The i-Personalize screen appears. The screen changes to the Media Xpander setting screen. Touch [;] or [:] of the desired MX mode. The level of the audio source can be adjusted. MX CD (OFF, CD1 to 3) The large quantity of uncompressed CD data is processed to reproduce the sound with more clarity. MX COMPRESS MEDIA (OFF, CMPM1 to 3) / MX DAB (OFF, DAB 1 to 3) This corrects information that was omitted at the time of compression. MX FM (OFF, FM1 to 3) The medium to high frequencies become more clear, and produces well balanced sound in all the bands. [. . . ] This is linked with putting the car into reverse (R). _ Connect this lead to the parking brake lead powered when parking brake is engaged. { Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. ( Monitor Control Lead (White/Pink) Connect this to the Monitor Control Lead of the touch panel-compatible rear monitor. | Fuse Holder (10A) } Right Front (+) Speaker Output Lead (Grey) V Right Front (­) Speaker Output Lead (Grey/Black) 0 Right Rear (­) Speaker Output Lead (Violet/Black) 1 Right Rear (+) Speaker Output Lead (Violet) 2 Left Rear (+) Speaker Output Lead (Green) 3 Left Rear (­) Speaker Output Lead (Green/Black) 4 Left Front (­) Speaker Output Lead (White/Black) 5 Left Front (+) Speaker Output Lead (White) ) Monitor Extension Cable (Included) ~ Remote IN/OUT Terminal + Display Output Terminal , System Switch When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ/DIV position. · Be sure to turn the power off to the unit before changing the switch position. 71-EN System Example Connect the Ai-NET compatible audio processor (Fiber digital compatible), Navigation system, DVD player and changer. IVA-D300R/IVA-D300RB Monitor NVE-N077PS/NVE-N099P Navigation system (Sold Separately) 5 Fiber optic cable 1 ! IVA-D300R/IVA-D300RB Tuner BOX *Fiber digital Input terminal (for head unit) SUBW. Audio Processor (Ai-NET) (Fiber Digital compatible) (Sold Separately) PRE IN/OUT REAR 2 FRONT 6 R L 6 POWER SUPPLY Ai-NET 6 Fiber digital Input terminal (for DVD Player) REMOTE IN / OUT EXT. OUT NAVIGATION IN 3 DISPLAY OUT AV. SELECTOR CAMERA IN AUX OUT Ai-NET 7 cable # VIDEO Fiber digital Input terminal (for Changer) L AUDIO R AUX IN RADIO ANTENNA IN ! Ai-NET cable ! **Fiber optic cable 4 EQ/DIV 9 8 NORM Fiber optic cable (Yellow) % (White/Brown) REMOTE OUT (White/Brown) $ REMOTE IN DVD Video Player (DVA-5210 etc. ) (Sold Separately) Ai-NET cable & " CD Changer (Ai-NET) (Sold Separately) **Only connect fiber digital compatible CD Changer · When the fiber digital compatible product is connected, it is necessary to set the mode of this unit. Refer to "Setting the Digital Output" (page 30) and set to ON. [. . . ]