User manual ALPINE IVA-D105R

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R Mobile Media Station EN IVA-D105R DE DIGITAL VIDEO FR · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] MIX*2 / AUX IN / AUX IN LEVEL*3 / USB ADAPTER / CAMERA IN / AUX OUT / BLUETOOTH IN / VISUAL KEY / ILLUMI. OUT*4 / OPTICAL OUT *1 When ON is set in "Setting the Picture/Sound Output" (page 38), the item is displayed. *2 When ON is set in "Setting the Navigation Mode" (page 37), the item is displayed. *3 When ON is set in "Setting the AUX Mode" (page 38), these items are displayed. *4 Not displayed when an extarnal audio processor is connected. · The touch panel rear monitor sensor has priority over the remote control sensor. If the rear monitor (connected to the Alpine rear monitor output via the Monitor control lead) is touched, the command is executed regardless of the remote control sensor switch setting. Note, however, that the remote control sensor that has been set takes priority if it has been 5 seconds since last touching the panel. · When an optional DVD changer or DVD player is connected, and the remote control sensor is set to REAR, some soft button operations ( [ ] STOP, etc. ) cannot be performed. In this case, set the remote control sensor to FRONT. Setting the Navigation Mode When you connect an optional navigation equipment, set it to ON. Setting item: NAV. The settings related to the navigation can not be changed from this unit. 4 Touch [RETURN] to return to the previous screen. · Immediately after changing the settings of System Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. Setting the External Device Interrupt Mode If an Alpine Ai-NET Interrupt Box (NVE-K200) is connected to the IVA-D105R, an Auxiliary Source will be allowed to interrupt the current audio source. For example, you can listen to the voice guidance of your navigation system when it occurs even while you are playing a CD or DVD. For further details, please refer to the manual for NVEK200. Setting item: IN INT. MUTE Setting content: OFF / ON OFF: The volume level can be adjusted in Interrupt mode. ON: Sound will not be output. · The auxiliary device being connected must have an Interrupt wire with a negative trigger for this function to operate automatically. · If ADAPTER is set in "Setting the Bluetooth Connection (Bluetooth IN)" (page 38), the IN INT. MUTE setting item is not displayed. 37-EN Setting the Navigation Interruption With an Alpine navigation system connected to the IVA-D105R, the voice guidance of the navigation system will be mixed with the radio or CD play. Setting item: NAV. MIX Setting content: OFF / ON OFF: The navigation interruption mode is turned off. ON: The navigation interruption mode is on. Setting the USB Adapter to ON/OFF If a USB Adapter is to be used, set to ON. Setting item: USB ADAPTER Setting content: OFF / ON OFF: Does not display the USB source name on the SOURCE select screen. ON: Displays the USB source name on the SOURCE select screen. See "Adjusting NAV. LEVEL:" under "Adjusting the Audio" on page 27 to set the navigation interruption volume level. · The volume level for voice prompts during navigation guidance is set by adjusting the its volume while the prompts are announced. [. . . ] Type of vehicle in which this unit is installed: Make: Purchased Year: 1. Art des Fahrzeugs, in das das Gerät installiert wurde: Marke: gekauft im Jahr: 1. Type de véhicule dans lequel cet appareil est installé: Marque: Année d'achat: Modèle: Année du modèle: Q6. Tipo de vehiculo en que la unidad está instalada: Marca: Año de compra: 1. [. . . ]