User manual ALPINE IVA-D100RB

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R Mobile Media Station EN IVA-D100R IVA-D100RB TM DE DIGITAL VIDEO FR · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] Be sure to select "BITSTREAM" when you want to connect a digital audio processor and play Dolby Digital audio. LPCM: The audio signals recorded on the disc are converted to 48 kHz/16 bit (for DVDs) or 44. 1 kHz (for video CDs and CDs) linear PCM audio signals for output. · When the settings are changed, the old settings are overwritten. The memory is cleared when the vehicle's battery is disconnected. · On unrated DVDs, playback will not be restricted even if the rating level is set. · If you want to play back DVD software with the parental lock feature and its use is currently restricted, change the rating level and the country number in order to play back the DVD. To enable playback of discs of higher rating levels or to cancel the parental lock, the setting must be changed. Do not leave DVDs accessible to young children for whom you deem them inappropriate. 31-EN Audio output/Optical digital audio output Disc Format LPCM (CD-DA, DVD-V, DVDA, DVD-VR) PPCM (DVD-A) Audio recording format Fs 44. 1/176. 4kHz 48/96/192kHz 44. 1/88. 2/ 176. 4kHz 48/96/192kHz Q 16/20/24bit 16/20/24bit 16/20/24bit 16/20/24bit 16/18/20bit Digital output setting (DVD SETUP) BITSTREAM or LPCM BITSTREAM or LPCM BITSTREAM or LPCM Optical digital audio output 44. 1kHz, 16bit, LPCM 2ch (2ch Downmix)* 48kHz, 16bit, LPCM 2ch (2ch Downmix)* Not output Analog audio output (Ai-NET, RCA output) OK OK OK Dolby Digital (-EX) (DVD-V, DVDA, DVD-VR) DTS (-ES) (CD-DA, DVD-V, DVDA) 48kHz LPCM BITSTREAM 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 7. 1ch)* 44. 1kHz, 16bit Decoded 2ch (2chDownmix)* Bit stream (Max 6. 1ch)* 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 6. 1ch)* 44. 1kHz, 16bit, Decoded 2ch* Bit stream* 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 5. 1ch)* 44. 1kHz, 16bit, Decoded 2ch* Bit stream* 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 5. 1ch)* 32kHz, 16bit, Decoded 2ch 44. 1kHz, 16bit, Decoded 2ch 48kHz, 16bit, Decoded 2ch OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK 44. 1kHz 16/20/24bit LPCM BITSTREAM 48/96kHz 16/20/24bit LPCM BITSTREAM MPEG1Layer II (VCD, DVD-V, DVD-A, DVDVR) 44. 1kHz 16bit LPCM BITSTREAM 48kHz 16bit LPCM BITSTREAM MPEG2Layer II (DVD-V, DVDA, DVD-VR) 44. 1kHz 16bit LPCM BITSTREAM 48kHz 16bit LPCM BITSTREAM MPEG1/2/ 2. 5Layer III (MP3, WMA) 32kHz 44. 1kHz 48kHz 16bit 16bit 16bit BITSTREAM or LPCM BITSTREAM or LPCM BITSTREAM or LPCM * Not output when playing back a DVD-Audio. 32-EN Setting the Downmix Mode This function applies to Dolby Digital, DTS stream sound. Setting item: DOWNMIX MODE Setting contents: SURROUND / STEREO SURROUND: Surround compatible Downmix STEREO: Stereo Downmix Setting of the Bonus Code Some DVD-Audio discs include bonus group. Refer to the information on the jacket, etc. , of the disc, for the code number. Setting item: BONUS CODE Setting contents: INPUT Setting the TV Screen Setting Use the procedure described below to modify the output screen according to the type of TV monitor (rear monitor) being used. If the rear monitor is not connected, the screen setting is 16:9. Setting item: TV SCREEN Setting contents: 4:3 LB / 4:3 PS / 16:9 1 2 3 Touch [INPUT]. The 10 key input screen is displayed. Input the 4 digit code number given on the jacket of the disc, etc. Touch [ENT] to memorize the number. · For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc's jacket. ) 4:3 LETTER BOX: Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black stripes visible at the top and bottom of the screen (when playing a 16 : 9 size movie). The width of these stripes will depend upon the original aspect ratio of the theatrical release of the movie. · If the code number of the bonus group differs from the code number you set in this section, the 10 key input screen automatically appears in the display. If a new code number is input, this code number will be replaced. Setting the DVD-Audio Playback Mode To playback the DVD Audio Disc, you have a choice of 3 different settings. If the disc containing DVD Video and Audio, set VCAP (Video Capable Audio Player) or VOFF (Video OFF) to playback the DVD Audio. Setting item: DVD-A SETUP Setting contents: VIDEO / VCAP / VOFF VIDEO: VCAP: VOFF: Only DVD Video is played back if the disc contains DVD Video and Audio. DVD Audio is played back without Video. 4:3 PAN-SCAN: Select this when connected to a conventional 4:3 size monitor. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16 : 9 size movie). Setting the Video CD Play Mode When playing a Playback Control (PBC) enabled video CD, you can choose to set PBC ON or OFF. Setting item: PBC Setting contents: ON / OFF ON: OFF: The PBC menu is displayed. The PBC menu is not displayed. 16:9 WIDE: Select this when connected to a wide screen TV. This is the factory setting. 33-EN GENERAL Setup General Setup Operation The Parking Brake must be engaged to access the General mode screen. Attempting to access this screen while driving will display the warning-CAN'T OPERATE WHILE DRIVING. Setting Daylight Saving Time Setting item: DAYLIGHT SAVING Setting content: OFF / ON Place the Summer Time mode ON. ON: Demonstration Function This unit is equipped with a demonstration function capable of showing basic operations of respective sources on the monitor display. The following steps 1 to 5 are common operations to each "Setting item" of GENERAL Setup. Refer to each section for details. Setting item: DEMONSTRATION Setting content: OFF / ON Turns on the demonstration mode to show the basic operations. [. . . ] · Do not bundle the DC/DC converter cable with other audio cables. · Keep the DC/DC converter away from the Antenna cables and the rear side of the unit, otherwise noise may be generated when receiving radio broadcast. Ai-NET Connector Connect this to the output or input connector of other product (CD changer, Equalizer, iPod adapter*, etc. ) equipped with Ai-NET. For details on connection, refer to the Owner's Manual of the KCA420i. Ai-NET Cable (Included with CD Changer) RGB Input Terminal Connect this to the RGB output terminal of the Navigation System. Video Input Connector (AUX INPUT) (Yellow) Input the video. Steering Remote Control Interface Connector To steering remote control interface box. For details about connections, consult your nearest Alpine dealer. Audio Input Connectors (AUX INPUT) RED is right and WHITE is left input the audio. Video Output Connector (Yellow) Output the video. System Switch When connecting a processor or divider using Ai-NET, place this switch in the EQ position. [. . . ]