User manual ALPINE IVA-D300

[. . . ] R EN Mobile Multimedia Station IVA-D300 TM FR DIGITAL VIDEO ES · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. ES IT ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] This function could be used, for instance, to change the screen brightness while travelling at night. Setting item: DIMMER LOW LEVEL Setting content: -15 to +15 You can adjust the level between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. Switching Background Textures You have a choice of 5 different background textures preset at the factory. Setting item: BACKGROUND Setting content: MODE1 to 5 The following steps 1 to 5 are common operations to each "Setting item" of DISPLAY Setup. Refer to each section for details. 1 2 3 4 Touch [SYS. ] on the main source screen. The SYSTEM selection screen is displayed. · When you select a source other than the built-in disc on this unit, and the built-in disc is selected on the rear monitor connected to the unit, background textures cannot be displayed on the unit. · When an error message is displayed (ERROR, HI-TEMP, etc. ), background textures selected by this setting cannot be displayed on the unit. Touch [SETUP]. The SETUP screen appears. Touch [ ] of DISPLAY SETUP. The DISPLAY setup screen appears. Touch [;] or [:] of the desired item to change its setting. Setting items: DIMMER / DIMMER LOW LEVEL / BACKGROUND / AUTO BACKGROUND / FONT TYPE / FONT COLOR / TOUCH PANEL / SCREEN ALIGNMENT 34-EN Setting Automatic Background Textures Turn on the Automatic Background Texture Scroll to automatically change background texture. The background texture will change each time the ignition key is turned off and turned back on again (5 textures). Setting item: AUTO BACKGROUND Setting content: OFF / ON ON: Turn on the Auto Background Texture Scroll mode. The background textures will scroll when the ignition key is turned off once and turned back on again as follows: i-PersonalizeTM Media Xpander Function Setting the MX mode To display the i-Personalize mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. MODE1 MODE2 MODE3 MODE4 MODE5 MODE1 OFF: Turn off the Auto Background Texture Scroll mode. Setting the Font Type You can choose a character (text and tag information, etc. ) font type for the main display. Setting item: FONT TYPE Setting content: FONT 1 / FONT 2 FONT1:Selects bold characters. Keep pushing the foot brake and release the parking brake once then engage it again. When the parking brake is engaged for the second time, release the foot brake. · For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the i-Personalize mode operation has been released. Engaging the parking brake can reactivate the i-Personalize mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of "To display the i-Personalize mode screen. " Each time the ignition is turned OFF, perform the procedure of "To display the i-Personalize mode screen. " Switching the Font Back Display Color You can choose from 5 different display colors for the font back (source title, shortcut display, etc. ). Setting item: FONT COLOR Setting contents: MODE 1 to MODE 5 Turning the Touch Panel Vibration ON or OFF You can turn the touch panel's vibration ON or OFF during operation. Setting item: TOUCH PANEL Setting content: NORMAL / FORCE NORMAL: Turns off vibration during operation. FORCE: Turns on vibration during operation. MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise. 1 2 3 4 Touch [SYS. ] on the source main screen. The SYSTEM selection screen is displayed. Touch [i-Personalize]. The screen changes to the i-Personalize. Adjusting the Touch Panel Adjustment becomes necessary when the display position on the LCD and the touch position on the touch panel do not match. Setting item: SCREEN ALIGNMENT Setting content: / RESET Touch [;] or [:] of MEDIA XPANDER to turn MX ON or OFF. OFF: MX mode is canceled for all music sources. ON: The selected MX mode is turned on. After setting to ON, touch [ ]. 1 Touch [ ] of SCREEN ALIGNMENT. 2 Accurately touch the mark provided in the lower left corner of the screen. 3 Accurately touch the mark provided in the upper right corner of the screen. This completes adjustment, and returns to the DISPLAY setup mode screen. · If you have touched a location other than the mark, touch [RESET] to restore the adjustment screen to the initial setting. · If you touch [RETURN] on the adjustment screen, no adjustment is done and the DISPLAY setup screen is restored. The screen changes to the Media Xpander setting screen. Continued 35-EN 5 Touch [;] or [:] of the desired MX mode. The level of the audio source can be adjusted. MX CD (OFF, CD1 to 3) The large quantity of uncompressed CD data is processed to reproduce the sound with more clarity. MX COMPRESS MEDIA (OFF, CMPM1 to 3)/MX XM (OFF, XM1 to 3) This corrects information that was omitted at the time of compression. [. . . ] If both are to be connected, connect the DVD video player to AUX IN 1, and the DVD changer to AUX IN 2. 1 System Switch When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ/DIV position. · Be sure to turn the power off to the unit before changing the switch position. 5 AV Selector Cable (Included with VPE-S431) 6 Monitor Control Lead (White/Pink) Connect this to the Monitor Control Lead of the touch panel-compatible rear monitor. 7 Remote Control Output Lead (White/Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control. 2 To AV Selector Terminal 3 AUX Video/Audio Output Terminal 4 RCA Extension Cable (Sold separately) 8 Ai-NET Cable (Included with DVD video player) 9 Ai-NET Cable (Included with DVD changer) !To Ai-NET Connector (Black) " To Ai-NET Connector (Gray) 75-EN LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. [. . . ]