User manual ALPINE INA-N033R

[. . . ] R EN INA-N033R GPS Car Navigation/CD Receiver · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · ISTRUZIONI PER L'USO Si prega di leggere prima di utilizzare il attrezzatura. [. . . ] TUNER CD CD CHANGER ( Only when the CD changer is connected) 3 g DN f UP F M. I. X. To eject the disc, press the c button. 4 Opening and Closing the Movable Display NOTES · If the CD does not eject, press c button again for at least 2 seconds with the movable display open. · In CD mode, if the navigation disc (sold separately) is loaded, "NAV. The movable display will open. About the usable discs. We recommend using only compact discs containing the marks shown below. You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) for audio use on this unit. You can not also play CD-Rs/CD-RWs containing MP3 formatted audio files. · Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e. g. , left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed a re-recording was attempted. (Movable display fully opened) To close the movable display, press the c button again. The movable display will close. NOTES · Do not apply shock to the movable display when it is open as it may result in malfunction of the unit. · The display will stop at the set angle when closing. CAUTION Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. Do not touch. Playback On handling Compact Discs (CD/CD-R/ CD-RW) · Do not touch the surface. · Do not affix stickers or labels and do not write on the surface. Heat and humidity may damage the CD and you may not be able to play it again. 1 Press the c button. The movable display will open. Insert a disc with the label side facing up. 12-EN Music Sensor (Skip) M. I. X. (Random Play) 1 Momentarily press the g DN button once during CD play to return to the beginning of the current track. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired track. Press the f UP button once to advance to the beginning of the next track. If you wish to access the beginning of a track further ahead, press repeatedly until the desired track is reached. 1 Press the M. I. X. indicator will illuminate and the tracks on the disc will be played back in a random sequence. After all the tracks on the disc have been played back once, the player will begin a new random sequence play until the M. I. X. button again to turn off the M. I. X. NOTES · If a CD Changer equipped with the ALL M. I. X. In this mode, the tracks on all the CDs in the current magazine will be included in the random playback sequence. NOTE The music sensor feature is functional in the play or pause mode. Fast Forward and Backward M. I. X. [. . . ] Do not use this lead to turn on an amplifier or a signal processor, etc. 9 Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. Fuse Holder (15A) " ISO Power Supply Connector # Speed Sensor (Green/White) Connect to VSS (Digital or Analog 0V - 3V) Improper connection of the speed pulse line may cause important safety features of the vehicle to fail (such as the brakes or air bags). We strongly recommend that the installation be performed by a trained, authorized Alpine dealer. * If the connectors of the vehicle are not ISO type or they are ISO type but not equipped with the speed sensor terminal on the vehicle side ISO connector, use the supplied speed sensor auxiliary cable to connect to the speed sensor cable of the vehicle. + Front Output RCA Connectors RED is right and WHITE is left. [. . . ]