User manual ALPINE IDA-X001

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R Digital Media Receiver EN iDA-X001 DE · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] Press BACK. The track (file) will be played repeatedly. *1 When an MP3 compatible CD changer is connected. will apply to the current disc only. · To cancel, select Off in the above procedure. 5 6 Press ENT. Press BACK. The tracks (files) will be played back in random sequence. · To cancel, select Off in the above procedure. 17-EN File/Folder Name Search (concerning MP3/WMA/AAC) You can display and search for the folder and file name while listening to the file currently being played back. About MP3/WMA/AAC CAUTION 1 During MP3/WMA/AAC playback, press /SEARCH to activate the search mode. The search mode is activated, and the folder/file name is displayed. When USB memory is connected, the folder/file name in the first hierarchy is displayed. When a changer is connected, the folder name is displayed. Except for private use, duplicating audio data (including MP3/ WMA/AAC data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty. What is MP3?MP3, whose official name is "MPEG-1 Audio Layer 3, " is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds. AAC is the abbreviation for "Advanced Audio Coding, " and is a basic format of audio compression used by MPEG2 or MPEG4. WMA is similar to MP3 audio data and can achieve CD quality sound with small file sizes. Method for creating MP3/WMA/AAC files Audio data is compressed by using MP3/WMA/AAC specified software. For details on creating MP3/WMA/AAC files, refer to the user's manual for that software. MP3/WMA/AAC file extensions that can be played back on the unit are as follows: MP3: "mp3" WMA: "wma" (ver. 7. 1, 8, 9 supported) AAC: "m4a" Depending on the software that is used to create AAC, the file format may differ from the extension. Unit playback of AAC files encoded by version 7. 0 iTunes is supported. Supported playback sampling rates and bit rates MP3 Sampling rates: 48 kHz, 44. 1 kHz, 32 kHz, 24 kHz, 22. 05 kHz, 16 kHz, 12 kHz, 11. 025 kHz, 8 kHz Bit rates: 8 - 320 kbps WMA Sampling rates: 48 kHz, 44. 1 kHz, 32 kHz, 24 kHz, 22. 05 kHz, 16 kHz Bit rates: 16 - 320 kbps AAC Sampling rates: 48 kHz, 44. 1 kHz Bit rates: 8 - 576 kbps 2 3 4 Turn the Center Jog Dial to select the desired folder/file. Proceed to step 4. Perform steps 2 and 3 repeatedly until you find the desired file. · If a changer is connected, searching starts with the folder name, then file name, in that order. · If USB memory is connected, the folder/file can be searched up to the eighth hierarchy. The ninth and subsequent folder/file(s) cannot be searched and played back. · Press and hold BACK for at least 2 seconds in the search mode to cancel. · While in the File/Folder Name Search mode, press BACK to switch to the previous mode. [. . . ] · If sound is not output or the iPod is not recognized even when the iPod is connected, remove the iPod once, then connect it again, or reset the iPod. 31-EN Connections To iPod or USB memory (Black) (Brown/Yellow) SWRC G. OUT ADAPTIVE STEERING REMOTE CONTROL IN1 (Brown/Orange) ADAPTIVE STEERING REMOTE CONTROL IN2 To adaptive steering remote control interface box To adaptive steering remote control interface box To adaptive steering remote control interface box To iPod To vehicle Display Interface Antenna JASO Antenna ISO Antenna (Pink/Black) AUDIO INTERRUPT IN To vehicle phone (Blue/White) REMOTE TURN-ON To amplifier or equalizer (Orange) DIMMER (Red) IGNITION (Black) GND (Blue) POWER ANT To the instrument cluster illumination lead To power antenna Ignition Key BATTERY (Yellow) (Green) (Green/Black) (White) (White/Black) (Grey/Black) Battery Rear Left Front Left Front Right (Grey) (Violet/Black) (Violet ) Rear Right Speakers *1 EQ NORM CD Changer (Sold Separately) Speakers Amplifier (Sold Separately) Rear Left Rear Right Amplifier (Sold Separately) Front Left Front Right Amplifier (Sold Separately) Subwoofers *1 The system switch is located on the bottom of the unit. 32-EN Vehicle Display Interface Connector Outputs Vehicle Display Interface control signals. For details about connections, consult your nearest Alpine dealer. Rear Output RCA Connectors RED is right and WHITE is left. Front Output RCA Connectors RED is right and WHITE is left. Antenna Receptacle Audio Interrupt In Lead (Pink/Black) Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is received. Subwoofer Ouput RCA Connectors RED is right and WHITE is left. System Switch When connecting a processor using Ai-NET, place this switch in the EQ position. · Be sure to turn the power off to the unit before changing the switch position. Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor. Dimmer Lead (Orange) This lead may be connected to the vehicle's instrument cluster illumination lead. This will enable the vehicle's dimmer control to dim the backlighting of the unit. Power Supply Connector Ai-NET Cable (Included with CD Changer) RCA Extension Cable (sold separately) ISO/JASO Antenna Adaptor (sold separately) An ISO/JASO antenna adapter may be required, depending on the vehicle. Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. [. . . ]