User manual ALPINE HCE-C500
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ALPINE HCE-C500. We hope that this ALPINE HCE-C500 user guide will be useful to you.
Manual abstract: user guide ALPINE HCE-C500
Detailed instructions for use are in the User's Guide.
[. . . ] FOR CAR USE ONLY
TOPVIEW® CAMERA SYSTEM
EN
HCE-C500
Please read before using this equipment.
· OWNER'S MANUAL
ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. [. . . ] e Rear Top View
The split-screen image displays an all-round view from above the vehicle and the rear view. Use this when you want to check for objects around or behind the vehicle. For example, when reversing into a garage.
Top View Rear View
* Distance guidelines are not displayed.
C
8-EN
p Indication mark meaning C Guidelines representing a distance of approx. 0. 5 m all round the vehicle.
e Rear View
Displays the area behind the vehicle. Use this when reversing into a garage or when checking for objects behind the vehicle.
· Rear View: Refer to "Rear View" (page 9). · Top View synthesises images from four cameras
and displays the combined view on the monitor. As the sensitivity of each camera is individually adjusted to the optimal degree, the image on the monitor may appear rather unnatural (brightness, tint, etc. ). · With Top View, the camera image around the joins · · ·
or borders may not be displayed. For details, refer to "About Top View Blind Spots" (page 13). Do not use Top View while retracting the door mirrors or when the vehicle doors are not completely closed, as the image will not be displayed properly. For details of how to switch image patterns, refer to "Camera Operation" (page 14). The image in the display is reversed, as you would see through the rearview mirror. As the camera uses a wide-angle lens, there is a difference between the actual distance and what appears on the screen. In the dark (nighttime, etc. ) The temperature near the lens is high or low. The camera has water droplets on it or the humidity is high (rainy day, etc. ). Sun light or the light of a headlamp directly enters the camera lens. The image range will be affected by the height or inclination of the vehicle. The position indicated by the distance guidelines, actual distance from the road surface and distances from objects will vary, depending on factors such as number of passengers, load weight and suspension adjustments. Always visually check the actual conditions around the vehicle to ensure safety.
p Indication mark meaning E Car width extension marks (orange, yellow and green in order of distance) If properly calibrated, the marks indicate the car's width. This helps guide the car's path when backing up in a straight line. F Distance guidelines The horizontal lines represent the distance from the rear of the car (from the rear end of the bumper). · The lines do not move in synchronisation with the steering wheel. [. . . ] Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. Reverse Input Lead
(Orange/White)
REVERSE
18-EN
SETUP switch (ON/OFF) This switch is used by your ALPINE dealer when calibrating this system. If you accidentally set it to "ON", the system may need to be recalibrated.
System Example
<Monitor>
Battery (12V) <I/F Box> * Ground lead (Black) Switched power lead (Ignition) (Red) Reverse lead (White) Switch Connector Camera input adapter
REV
Battery lead (Yellow)
BATT
Fuse (7. 5A)
Switched power lead
ACC ACC
(Red) Reverse lead
REVERSE
(Orange/White)
4P
Currently not used. Video output connector (Yellow)
VIDEO OUTPUT
RCA extension cable
Rear camera output connector
REAR CAMERA OUT
Side camera (R)
SIDE-RIGHT
Side camera (R) extension cable (3. 5m)
RIGHT
(Yellow) Front camera output connector
FRONT CAMERA OUT
Side camera junction cable (for side camera) Side camera (L)
SIDE-LEFT
(Violet) (Violet) Side camera (L) extension cable (3. 5m)
LEFT
RIGHT
(Blue)
(White)
LEFT
Front camera
FRONT
Front camera extension cable (5. 5m)
FRONT
(White)
ILLM
(Orange)
CAMERA CONTROL
(Grey)
FRONT
(Orange/Black) (Grey)
Rear camera
REAR
Rear camera extension cable (8m)
REAR
(Green) (Green) Camera cable (for side camera) Camera cable (for front/rear camera)
REAR
Power cable
* Connect this lead to a good chassis ground on the vehicle. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALPINE HCE-C500
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ALPINE HCE-C500 will begin.