User manual ALPINE DVA-5205P

[. . . ] Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U. K. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 ALPINE ITALIA S. p. A. [. . . ] If the vehicle's battery is disconnected, the settings will be cleared and will return to the factory settings. Setting the Digital Output Use the following procedure to set the digital audio signal output from the DVA-5205P. ENT. RETURN Setting item: DIGITAL OUT Further setting items: DOLBY D / DTS Press ENT. or to select your desired setting item, then press Sets Dolby Digital output. The initial setting is BITSTREAM. DOLBY D: DTS: SETUP Setting contents: BITSTREAM / LPCM Press ENT. or to select BITSTREAM or LPCM, then press Audio Setup Operation · Audio Setup Operation is performed by the remote control unit. Refer to the specific section for details. 1 Press SETUP before inserting a disc, or when in stop mode. The setup menu appears on the monitor. S E T UP L T P A C A V A U U NG S RE DI ST UA CR NT O OM G E A S E E L E S S N TUP ETUP BITSTREAM:The digital output is switched automatically according to the type of audio signal being played. Be sure to select "BITSTREAM" when you want to connect a digital audio processor and play Dolby Digital audio. LPCM: The audio signal recorded on the disc is converted to 48 kHz/16 bit (for DVDs) or 44. 1 kHz (for video CDs and CDs) linear PCM audio signals for output. · Press RETURN to return to the previous screen. 16 9 OFF WI DE EN 2 3 Press ENT. or to select "AUDIO SETUP, " then press Press or to select your desired setting item, then press ENT. AUDIO SETUP items: DIGITAL OUT/ DOWNMIX MODE S E T UP AUD I O SETUP OUT MODE DIGITAL DOWNM I X SURROUND 4 Press or to change the setting, then press ENT. 29-EN Audio output/Optical digital audio output Disc Format LPCM (CD-DA, DVD-V, DVDA, DVD-VR) PPCM (DVD-A) Audio recording format Fs 44. 1/176. 4kHz 48/96/192kHz 44. 1/88. 2/ 176. 4kHz 48/96/192kHz Q 16/20/24bit 16/20/24bit 16/20/24bit 16/20/24bit 16/18/20bit Digital output setting (DVD SETUP) BITSTREAM or LPCM BITSTREAM or LPCM BITSTREAM or LPCM Optical digital audio output 44. 1kHz, 16bit, LPCM 2ch (2ch Downmix)* 48kHz, 16bit, LPCM 2ch (2ch Downmix)* Not output Analog audio output (Ai-NET, RCA output) OK OK OK Dolby Digital (-EX) (DVD-V, DVDA, DVD-VR) DTS (-ES) (CD-DA, DVD-V, DVDA) 48kHz LPCM BITSTREAM 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 7. 1ch)* 44. 1kHz, 16bit Decoded 2ch (2chDownmix)* Bit stream (Max 6. 1ch)* 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 6. 1ch)* 44. 1kHz, 16bit, Decoded 2ch* Bit stream* 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 5. 1ch)* 44. 1kHz, 16bit, Decoded 2ch* Bit stream* 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 5. 1ch)* 32kHz, 16bit, Decoded 2ch 44. 1kHz, 16bit, Decoded 2ch 48kHz, 16bit, Decoded 2ch OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK 44. 1kHz 16/20/24bit LPCM BITSTREAM 48/96kHz 16/20/24bit LPCM BITSTREAM MPEG1Layer II (VCD, DVD-V, DVD-A, DVDVR) 44. 1kHz 16bit LPCM BITSTREAM 48kHz 16bit LPCM BITSTREAM MPEG2Layer II (DVD-V, DVDA, DVD-VR) 44. 1kHz 16bit LPCM BITSTREAM 48kHz 16bit LPCM BITSTREAM MPEG1/2/ 2. 5Layer III (MP3, WMA) 32kHz 44. 1kHz 48kHz 16bit 16bit 16bit BITSTREAM or LPCM BITSTREAM or LPCM BITSTREAM or LPCM * Not output when playing back a DVD-Audio. Setting the Downmix Mode This function applies to Dolby Digital, DTS stream sound. Setting item: DOWNMIX MODE Setting contents: STEREO/SURROUND ENCODED STEREO: Stereo Downmix SURROUND ENCODED: Surround compatible Downmix The initial setting at the factory is SURROUND ENCODED. 30-EN Custom Setup 5 When the setting is complete, press SETUP. The setup returns to normal mode. · When settings are changed, old settings are overwritten. If the vehicle's battery is disconnected, the settings will be cleared and will return to the factory settings. Setting the DVD Audio Playback Mode To playback the DVD Audio Disc, you have a choice of 3 different settings. If the disc containing DVD Video and Audio, set VCAP (Video Capable Audio Player) or VOFF (Video OFF) to playback the DVD Audio. Setting item: DVD-A PLAY MODE Setting contents: VIDEO/VCAP/VOFF Numeric keypad (0 to 9) ENT. RETURN CLR SETUP Only DVD Video is played back if the disc contains DVD Video and Audio. If a disc has already been inserted, perform the setting after you remove the disc. Setting the CD Play Mode Custom Setup Operation · Custom Setup Operation is performed by the remote control unit. While displaying "RADIO ID" as shown above, Demonstration (page 25) become nonfunctional. 2 1 2 3 To cancel the ID number display, set the channel to other than "0. " SIRIUS: While receving a SAT Radio band, press to select channel "255" for SIRIUS. COMP NAME CLOCK CHANNEL No. 1 2 Press SOURCE/POWER to select SAT Radio mode. Press BAND to select between one of the three SAT Radio Preset Bands. Each press changes the band: XM mode: XM1 XM2 XM3 XM1 SR1 To cancel the ID number display, set the channel to other than "255". · You cannot use "O, " "S, " "I, " or "F" for the ID Number (XM radio Receiver only). · You can check the ID number printed on a label on your third party, SAT Radio Receiver package. SIRIUS mode: SR1 SR2 SR3 32-EN Setting the Tuning Method You can set the tuning method. To customers using the SIRIUS Tuner Box: For details about functions, refer to the SIRIUS Tuner Box Owner's Manual. Channel/Category Search Function You can search for programs by Channel No. or Category. 1 2 Press in the XM or SIRIUS mode. Turn the Rotary encoder to select Channel Search mode or Category Search mode, then press . 1 2 3 4 Press MENU to select the SETUP mode, then press MODE. to select "CH SELECT, " then Category Search mode: 3 4 Turn the Rotary encoder to select the desired Category, then press . or Channel Name, then press MODE. Turn the Rotary encoder to set the tuning method. CH No. : ALPHABET: Set in order of channel No. Set in alphabetic order. · Search items vary depending on the setting in "Setting the Tuning Method" (page 33). When "CH NO" is selected: Channel No. Search When "ALPHABET" is selected: Channel Name Search Press MENU to select RETURN. After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. · When the setting is completed, switch the channel DOWN/UP by pressing the or . · While in Category Search mode, press FUNC. [. . . ] The serial number or the engraved serial number is located on the bottom of the unit. SERIAL NUMBER: INSTALLATION DATE: INSTALLATION TECHNICIAN: PLACE OF PURCHASE: 62-EN Installation Caution 2 Hex Nut (M5) Screw Do not block the unit's fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire. Air ventilation hole Metal Mounting Strap ** Bolt Stud * This unit Ground Lead (Rear side) Chassis Accessory List · · · · · · · · · · Head unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Power cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Mounting sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Carrying case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Bracket key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Screw (M5x8). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 RCA extension cable (Video) (2m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Battery (CR2025). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Owner's Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 set Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the vehicle's chassis. · For the screw marked **, use an appropriate screw for the chosen mounting location. Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the DVA-5205P. Connect all other leads of the DVA-5205P according to details described in the "Connections" section. · The main unit must be mounted within 35 degrees of the horizontal plane, back to front. 3 Slide the DVA-5205P into the dashboard until it clicks. [. . . ]