User manual ALPINE DA-X300 NOTE

[. . . ] Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave. , Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7, 40878 Ratingen, Germany Phone 02102-4550 ALPINE ELECTRONICS OF U. K. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 ALPINE ITALIA S. p. A. [. . . ] · If the unit is connected to an audio processor with the MX function, such as PXA-H700, etc. , the MX processing can be applied to the audio processor. For details, refer to the Owner's Manual of the audio processor. 19-EN Other Functions -/J DISP/ B. OUT TITLE / BAND/TEL. CDA-9813/DA-X300 FILE NO. /ELAPSED TIME FOLDER NO. /FILE NO. FILE NO. /CLOCK FOLDER NAME*6 FILE NAME TRACK NAME*4 ARTIST NAME*4 ALBUM NAME *4 FRAME*5 FILE NO. /ELAPSED TIME g f Rotary encoder *1 TITLE can be input or erased. "NO TEXT" will be displayed when the CD contains no Text data. *4 ID3 tag/WMA tag If an MP3/WMA file contains ID3 tag/WMA tag information, all the ID3 tag/WMA tag information is displayed (e. g. , track name, artist name, and album name). "NO DATA" will be displayed when an MP3/WMA file contains no ID3 tag/WMA tag information. *5 The recording sampling rate and bit rate of the MP3/WMA file are displayed. *6 "­ ­ ­ ­ ­ ­ ­ ­" is displayed for the folder name of the root folder (display example: DA-X300). Displaying the Title/Text It is possible to display the CD/Station title if the title has been previously inputted ("Titling Disc/Stations" page 21). Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name, and the tag, etc. , while playing MP3/WMA files. About "Title" and "Text" Title: With this device, it is possible to input the CD/Station name (page 21). This inputted name is referred to as a "title. " You cannot input or display titles on MP3/WMA discs. This additional power enhances the sound quality. · If you cancel while entering a title, selected characters are not written. · You can enter 24 radio station titles and 18 CD titles on this unit. If you try to store beyond the limit, the display will show "FULL DATA. " At this point, no more titles can be stored. To input a new title, one of the previously inputted titles must first be deleted. · The CD Changer title length or memory capacity varies depending upon the model being used. · When you want to erase a title, enter the " " (" " for CDA9815) symbol into all spaces. · The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be canceled if no action is taken for over 10 seconds. Press and hold DISP/B. OUT for at least 3 seconds to activate the blackout mode. The display will turn off. · If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. To cancel Blackout mode, press and hold DISP/B. OUT for at least 3 seconds. 21-EN i-PersonalizeTM Operation (CDA-9815 only) SOURCE/ POWER -/J Rotary encoder Data Downloading 1 2 3 Insert the CD-R disc containing the data. If the source is not the CD mode, press SOURCE/ POWER to change to CD mode. [. . . ] · You can use the built-in amplifier to output the front output/rear output. · You cannot adjust the fader when set to 3WAY. To prevent noise/interference in the audio system. · Locate the unit and route the leads at least 10 cm away from the car harness. · Keep the battery power leads as far away from other leads as possible. [. . . ]