User manual ALPINE CVA-1004

[. . . ] R EN CVA-1004 MOBILE MULTIMEDIA STATION · OWNER'S MANUAL Please read before using this equipment. FR ES · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. ES IT ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave. , Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. [. . . ] (displayed in the monitor) (MP3 files can be played back with the CVA-1004 if an MP3 compatible changer is connected. ) TAG (TRACK/ALBUM/ARTIST NAME) DISPLAY2 FILE/FOLDER NAME DISPLAY FRAME DISPLAY3 TITLE DISPLAY 1 Press TITLE . The mode will change every time the button is pressed. About "Title" and "Text" Title: With this device, it is possible to input the Disc/ Station name (refer to page 25). This inputted name is referred to as a "title. " You cannot input or display titles on MP3 discs. Text: Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as "text. " MP3 mode: The monitor is closed. (displayed in the sub-display) TRACK No. /ELAPSED TIME DISPLAY CLOCK DISPLAY TAG (TRACK/ALBUM/ARTIST NAME) DISPLAY2 FOLDER NAME DISPLAY FILE NAME DISPLAY FRAME DISPLAY3 TITLE DISPLAY CD text disc mark indicates that the CD has text data. (displayed in the monitor) TITLE DISPLAY 1 Displayed during playback of a disc with CD Text. When the CD contains no Text data, the monitor display will be blank or the submonitor will display "_ _ _ _ _ _ _ _. " 24-EN Other Useful Features 2 3 If an MP3 file contains ID3 tag information, all the ID3 tag information is displayed (e. g. , track name, artist name, or album name). "NO TAG" will be displayed if an MP3 file contains no ID3 tag information. The recording sampling rate and bit rate of the MP3 file are displayed. 1 When the monitor is open, press TITLE and select the title display mode. Press g or f to select the desired letter/ numeral/symbol available for naming. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title. Pressing -/J after entering the 8th character, automatically stores the title into memory. When entering a title of less than 8 characters (for example, 3 character title): After entering 3 characters to complete your title, the 4th character space will be blinking. Go to step 6 to complete the title. 2 3 4 NOTES · Some characters may not be displayed correctly with this device, depending on the character type. · The CD changer must also be CD Text compatible for the Text information to be displayed. · When the Scroll Setting (refer to page 31) is set to for at least 2 "MANUAL", press and hold TITLE seconds to scroll the Text information, etc. , only once. · "NO SUPPORT" is displayed when the desired text information cannot be displayed on this unit. · If the title was not previously input, the monitor display will be blank or the sub-monitor will display "_ _ _ _ _ _ _ _. " 5 Titling Discs/Stations It is possible to title your favorite discs or radio stations. To activate the Title display mode: To title a disc, your vehicle must be parked with the ignition key in the ACC or ON position. Push the foot brake to bring your vehicle to a complete stop at a safe location. Keep pushing the foot brake and release the parking brake once then engage it again. [. . . ] 9 Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. " Fuse Holder (7. 5A) 53-EN LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. [. . . ]