User manual ALPINE CTA-1502R

[. . . ] OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. When problems occur such as a lack of sound or video, foreign objects inside the unit, smoke coming out, or noxious odors, stop use immediately and contact the dealer where you bought the equipment. Operating the equipment may distract the driver from looking ahead of the vehicle and cause accident. [. . . ] If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. Note: Setting should be performed within 5 seconds after the FUNC button is pressed. The unit will automatically return to the normal mode 5 seconds after pressing the button. Press and hold the INTLZ button for at least 3 seconds to activate the setting mode. In the REG OFF mode, the unit automatically keeps receiving the related local RDS station. When a traffic information station is tuned in, the TP indicator lights up. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRF-INFO" for 5 seconds, then returns to the previous display. When traffic information broadcast is over, the unit will automatically set in the standby mode. Setting should be performed within 5 seconds after the FUNC button is pressed. Note: The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternative frequencies to the AF list. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. Note: Setting should be performed within 5 seconds after the FUNC button is pressed. The unit will automatically return to the normal mode 5 seconds after pressing the button. This function allows presetting of a programme type such as music category, news, etc. You can listen to a programme in the preset programme type as the unit automatically gives priority to the preset programme type when it begins broadcasting, and interrupts the programme you are currently listening. This feature is functional when your unit is set to a mode other than the LW and MW. "PRIO PTY" is displayed for 2 seconds and then the programme type for 5 seconds. " Note: If no button is pressed within 5 seconds after pressing the P. Press the DN g or f UP button within 5 seconds while "NEWS" is being displayed to choose a desired programme type. Note: Setting should be performed within 5 seconds after the FUNC button is pressed. The unit will automatically return to the normal mode 5 seconds after pressing the button. [. . . ] Applicable battery: Use two "AAA" sized dry batteries or equivalent. Opening the battery cover Slide out the battery cover while firmly pressing outward. Closing the cover Push the cover as illustrated until a click is heard. Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. [. . . ]