User manual ALPINE CHM-S655RF

[. . . ] Make sure the discs you use in this unit do not have any irregularities. As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. [. . . ] When turning the unit On or Off with · Si vous mettez l'unité sous ou hors tension the POWER button, be sure to lower avec la touche POWER, assurez-vous de the volume level of the factorybaisser le niveau de volume de la radio installed radio. ceci évitera que les bruits · Electrical pop noises from entering the de crachement électrique entrent dans le system. Once you are sure all connections are · Après la vérification des connexions, vous proper, you may turn the unit on. To listen to an FM broadcast, turn down the volume of the radio then turn power off to the CHM-S665RF. Tune the radio to your desired station and adjust the volume to your preference. Note: After the last track on the last disc Remarque: Lorsque la dernière plage sur le is played, the optical pickup dernier disque a été lue, la tête returns to disc 1. Playback will optique de lecture revient au continue from the beginning of disc disque 1. Press the 8 or 9 button until your desired disc number appears in the display. With this feature, you can get to the beginning of the music track of your choice simply and quickly. Momentarily press the c DN button once to return to the beginning of the current track. If you wish to access a track further back, repeatedly press until you reach the desired track. Press the UP f button once to advance to the beginning of the next track. If you wish to access a track further ahead, press repeatedly until the desired track is reached. The audible Fast Forward/Fast Backward feature works only in the play mode. This feature is convenient to access a specific passage within a musical track. Fast Forward/Fast Backward also works in the Pause mode, although it will not be audible. The pickup will quickly move backward or forward until you reach the desired section of the track. When the pickup reaches the end of the disc in the Fast Forward mode, the unit will go into the pause mode. When the pickup reaches the beginning of the disc in the Fast Backward mode, the unit will begin playback. After all the tracks on the disc have been played back once, the player will load the next disc and begin a new random sequence until the M. This feature allows you to continuously repeat a single track or one entire disc. REPEATREPEAT ALLOFF While playing a disc, press and release the REPEAT button until the REPEAT ALL indicators are displayed. [. . . ] If you encounter a problem, please review the items in the following check list. Otherwise, make sure the rest of your English system is properly connected or consult your authorized Alpine dealer. ­ Make sure ACC Power lead and Ground lead are connected properly. ­ Press the Reset button with a ball-point pen or other pointed article. [. . . ]