User manual ALPINE CDE-7870

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ALPINE CDE-7870. We hope that this ALPINE CDE-7870 user guide will be useful to you.


ALPINE CDE-7870 : Download the complete user guide (558 Ko)

Manual abstract: user guide ALPINE CDE-7870

Detailed instructions for use are in the User's Guide.

[. . . ] R CDM-7874 CDE-7872 CDE-7870 FM/AM Compact Disc Receiver · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. EN FR ES ES IT ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel. : (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] Press the BAND button repeatedly until the desired radio band is displayed. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into presets 1 to 6 buttons in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. 3 10-EN Storing into Direct Access Preset (D. A. P. ) Band A combination of radio stations in any band (up to 6 stations) can be manually preset into the D. A. P. band. Tuning to Preset Stations 1 2 Press the SOURCE button to select the radio mode. band, follow the steps for the Automatic or Manual Storing of Station Presets section above. NOTE This function can be used together with the Automatic Memory Preset. 3 Press the station Preset button that has your desired radio station in memory. The display shows the band, preset number with a triangle and frequency of the station selected. To cancel the D. A. P. indicator will turn off. 11-EN CD Player Operation -/J c g DN f UP F (CDM-7874 only) M. I. X. REPEAT SCAN Inserting/Ejecting Disc About the usable discs. We recommend using only compact discs containing the marks shown below. You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable) for audio use on this unit. You can not also play CD-Rs/CD-RWs containing MP3 formatted audio files. · Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e. g. , left in the car or this unit), CDs recorded under unstable conditions, CDs not designed for audio use, CDs on which a recording failed a rerecording was attempted. 1 Insert a CD half way into the slot with the label side facing up. The player automatically draws the disc into the disc compartment. The Disc indicator appears to show that a disc is loaded. NOTE Three-inch (8cm) CD's can be used. 2 Press the c(Eject) button when you want to eject the CD. NOTES · If the CD is not removed for several seconds after it has been ejected, the player automatically draws the CD into the compartment to protect the CD. · Do not insert or remove a CD forcibly when loading or ejecting a CD, as malfunction may result. On handling Compact Discs (CD/CD-R/ CD-RW) · Do not touch the surface. · Do not affix stickers or labels and do not write on the surface. Heat and humidity may damage the CD and you may not be able to play it again. 12-EN Normal Play and Pause Repeat Play 1 Insert a CD. The CD player begins playback from the first track on the disc. 1 Press the REPEAT button to play back repeatedly the track being played. The RPT or REPEAT indicator appears and the track will be played repeatedly. Press the REPEAT button again and select OFF to deactivate the repeat play. NOTE If a CD Changer is connected and the RPT ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected. (CDM-7874 only) The display shows the track number and elapsed time of the track being played (Only the track number is displayed on CDE-7872/CDE-7870). When the last track is played back the player returns to the first track. [. . . ] · Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis. · If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various Alpine noise suppressors, contact them for further information. · Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information. 21-EN 22-EN LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ALPINE CDE-7870




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ALPINE CDE-7870 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.