User manual ALPINE CDE-7854RM

[. . . ] R CDM-7857RB CDE-7855RB CDE-7854RM CDE-7854R CDE-7853R FM/MW/LW/RDS CD Receiver · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] In the REG OFF mode, the unit automatically keeps receiving the related local RDS station. Press the INTLZ button to deactivate the setting mode. Press the DN g and f UP buttons within 5 seconds after activating the PTY mode to choose the desired programme type while the PTY (programme type) is being displayed. LIGHT M CLASSICS OTHER M Press the PTY button within 5 seconds after selecting the programme type to start searching for a station in the selected programme type. The chosen programme type indicator blinks during searching and lights when a station is found. If no PTY station is found, "NO PTY" will be displayed for 2 seconds. 3 Receiving Traffic Information Press the T. INFO button repeatedly until the T. INFO indicator appears in the display. Press the DN g or f UP button to select your desired traffic information station. When a traffic information station is tuned in, the TP indicator lights up. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRF-INFO" for a few seconds and returns to the PS display. When the traffic information broadcast is over, the unit will automatically set in the standby mode. NOTES · If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the "T. INFO" indicator blinks. · If you do not want to listen to the traffic information being received, lightly press the T. INFO button to skip that traffic information message. INFO mode will remain in the ON position to receive the next traffic information message. · If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized. Receiving Traffic Information While Playing CD or Radio 1 2 Press the T. INFO button repeatedly until the T. INFO indicator appears in the display. Press the DN g and f UP buttons to select a traffic information station if necessary. · When a traffic information broadcast starts, the unit automatically mutes the CD player/ changer or the regular FM broadcast. · When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received for over 1 minute, the "T. INFO" indicator blinks. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. NOTE The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. PTY (Programme Type) Tuning 1 Press and hold the PTY button for at least 2 seconds to activate the PTY mode. The Programme Type of the station being currently received will be displayed for 5 seconds. · If there is no receivable PTY broadcast, "NO PTY" will be displayed for 5 seconds. [. . . ] 4 Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. 5 Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. NOTE This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc. Fuse Holder (15A) Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. [. . . ]