User manual ALPINE CDE-104BTI

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ /DO UYCIA TYLKO W SAMOCHODZIE/ EN R MP3/WMA/AAC CD Receiver CDE-103BT/CDE-104BTi DE FR (CDE-104BTi only) MP3/WMA/AAC CD Receiver ES CDE-102Ri IT SE MP3 CD Receiver CDE-101R/CDE-101RM NL RU · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] When the display is filled, it is cleared and the remaining words are displayed the same way until all words of the title have been shown. Sound Customizing Adjusting Source Signal Levels FM-LV HI (Initial setting) / FM-LV LOW Scroll Setting (TEXT SCR) SCR AUTO / SCR MANU (Initial setting) If the difference in volume level between the CD player and FM radio is too great, adjust the FM signal level. This CD player can scroll the disc and track names recorded on CD-TEXT discs, as well as the text information of MP3/WMA/AAC files, folder names and tags. SCR AUTO: The CD text information, the text information of folder and file names, and the tags are scrolled automatically. The display is scrolled when a disc is loaded or when a track is changed, etc. Subwoofer On and Off SUBW ON (Initial setting) / SUBW OFF When the subwoofer is on, perform the steps below to adjust the subwoofer output level. 1 In the normal mode, press Rotary encoder (AUDIO) repeatedly to select the SUBWOOFER mode. SUBWOOFER BASS LEVEL TRE LEVEL BALANCE FADER DEFEAT VOLUME SUBWOOFER SCR MANU: · The unit scrolls CD text names, folder names, file names or tag display. Demonstration DEMO ON / DEMO OFF (Initial setting) 2 Adjust the level by turning the Rotary encoder. Setting the Subwoofer System SUBW SYS 1 (Initial setting) / SUBW SYS 2 This unit has a demonstration feature for the display. · To quit Demo mode, set to DEMO OFF. Select either SYS 1 or SYS 2 for the desired subwoofer effect. SUBW SYS 1: Subwoofer level changes according to the main volume setting. SUBW SYS 2: Subwoofer level change is different from the main volume setting. For example, even at low volume settings, the subwoofer is still audible. 19-EN MP3/WMA/AAC Playing MP3 Data (PLAY MODE) CD-DA (Initial setting) / CDDA/MP3 POW ON : The speakers are driven by the built-in amplifier. Speakers SPEAKER RIGHT FRONT This unit can play back CDs containing both CD and MP3/WMA/AAC data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and MP3/WMA/AAC data, playback starts from the CD data portion of the disc. CD-DA: Only the CD data in Session 1 can be played back. CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and multi-session discs can be played back. Front right SPEAKER RIGHT REAR Rear right · Perform this setting before inserting a disc. If a disc has already been inserted, remove it first. SPEAKER LEFT REAR Rear left External Device Turning Mute Mode On/Off (INT MUTE) MUTE ON / MUTE OFF (Initial setting) SPEAKER LEFT FRONT Front left If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. · No sound is produced by the system when the power output is set to OFF. Setting the AUX+ SETUP Mode Connecting to an External Amplifier (POWER IC) POW ON (Initial setting) / POW OFF AUX+ ON / AUX+ OFF (Initial setting) When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. POW OFF: Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit's internal amplifier is turned OFF and cannot drive speakers. An external device (such as a portable music player) can be connected to the Full Speed connector of this unit. A conversion cable (KCE-237B) for build up the AUX IN (optional) is required. A portable music device and an iPhone/iPod cannot be connected to the Full Speed connector at the same time. Set to ON when a portable device is connected. If SOURCE/ is pressed and AUX+ is selected, the sound of the portable device is input to the unit. AUX+ ON: CDE-102Ri/CDE-103BT/CDE-104BTi: Front left Front right Rear left Rear right CDE-101R/CDE-101RM: Front left Front right Amplifier You can change the AUX+ name display when AUX+ is set to ON. Press / /ENT when AUX+ is set to ON, and select AUX+ NAME by turning the Rotary encoder, then press / /ENT. After that, turn the Rotary encoder to select the desired AUX+ name. Amplifier Setting the AUX NAME mode (CDE-102Ri/CDE-103BT/ CDE-104BTi only) AUXILIARY *1(Initial setting) / TV / DVD / PORTABLE*2 / GAME You can change the AUX NAME display in the SETUP mode. *2 After the setting is completed, PMD is displayed on the unit. Amplifier 20-EN BLUETOOTH (CDE-103BT/ CDE-104BTi only) /VOICE DIAL Rotary encoder 1 How to connect to a Bluetooth compatible device (Pairing) For details on the control from a Bluetooth compatible device, refer to the Owner's Manual of the Bluetooth compatible device. 1 2 /AF Set a Bluetooth connection from a Bluetooth compatible device. The PIN code ("0000") is displayed on the connected unit. 2 3 4 · The PIN code is fixed as "0000". Input the PIN code ("0000") in a Bluetooth compatible device. If this unit is successfully connected to a Bluetooth compatible device, "CONNECTED" is displayed, and then the unit returns to normal mode. / /SOUND/ /ENT FUNC. /SETUP * The illustrator is for CDE-104BTi. Setup Before Using About Bluetooth Bluetooth is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between Bluetooth compatible devices. [. . . ] Install the detachable front panel. Pressure Plates* This unit Lock Pin * If the installed mounting sleeve is loose in the dashboard, the pressure plates may be bent slightly to remedy the problem. Remove the mounting sleeve from the main unit (see "Removal" on page 35). Slide the mounting sleeve into the dashboard and fix it with the metal shackles. 34-EN Removal 1. Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin. [. . . ]