User manual ALPINE CDA-W560E

[. . . ] R EN CDA-W560E CDA-W560EG CD/CST/DSP RECEIVER · OWNER'S MANUAL Please read before using this equipment. CH ES · ES IT ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave. , Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. [. . . ] When the automatic memory has been completed, the tuner goes to the station stored in preset location no. · If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. 16-EN Tuning to Preset Stations 1 2 Press BAND to select the band. FM1 FM2 AM CD Changer Operation (Optional) //Rotary encoder f BAND SOURCE/POWER Press / or - to select the preset number. The selected broadcast station will be received. FM1- 1 87. 50 MHz Preset number display (Display of the received broadcast station stored in preset numbers "1" to "6". ) · The ST indicator appears on the display when a stereo FM station is tuned in. g -/J / ENT. Station Title Search Function If titles for radio stations are entered, you can search for a radio station from its title. Controlling CD Changer 1 2 3 Press (SEARCH) in TUNER mode to switch to Title Search mode. The first title input blinks in the display. 1 Press SOURCE/POWER to set the changer mode. TUNER TAPE CD CHANGER* Press / or - to select the desired title within 10 seconds. to receive the frequency of the selected title. (* Only when the changer is connected) 2 3 4 5 When selecting the disc number, press / or - to select the desired disc. , to select the · Title Search mode will be cancelled by pressing (SEARCH) or if an operation has not been performed in 10 seconds. · If a station has no title, "NO TITLE" is displayed for 2 seconds. Turn the Rotary encoder and adjust the volume (0 to 35). again to start playback. · Changer operation can be controlled in the same way as the builtin CD or MP3. (Please see Pages 7 to 13. ) · Pressing BAND in the CD/Changer mode will change the disc mode. · This unit uses the Versatile Link Terminal (KCA-410C) and allows product selection by pressing BAND when 2 changers or other equipment is connected. 17-EN Title/Text Operation TITLE //- MP3/WMA mode: FOLDER NO. /FILE NO. /CLOCK DISPLAY FOLDER NAME DISPLAY * 5 FILE NAME DISPLAY BAND TRACK NAME DISPLAY ARTIST NAME DISPLAY *4 ID3 tag/ WMA tag -/J / ENT. ALBUM NAME DISPLAY FUNCTION/SETUP SCAN MODE DISPLAY*3 Displaying the Title/Text It is possible to display the Disc/Station title if the title has been previously inputted. Text information, such as the disc name and the track name, will be displayed if playing a CD text discs with the title inputted. It is also possible to display the folder name, the file name, and the tag, etc. *1 If the title was not previously input, "NO TITLE" is displayed. "NO TEXT" will be displayed when the CD contains no Text data. CD: TEXT (disc name, track name) MP3/WMA: TAG (track name, artist name, album name), FOLDER NAME, FILE NAME *4 If an MP3/WMA file contains ID3 tag/WMA tag information, the ID3 tag/WMA tag information is displayed. "NO DATA" will be displayed if an MP3/WMA file contains no ID3 tag/WMA tag information. *5 Root folders are displayed as "- - - - - - - - - - - - - - - -. " · Some characters may not be displayed correctly with this device, depending on the character type. · The CD changer must also be CD Text compatible for the Text information to be displayed. · When the Scroll Setting (refer to page 19) is set to "SCROLL MANUAL, " press and hold TITLE for at least 3 seconds to scroll the Text information only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode). · "NO SUPPORT" is displayed when the desired text information cannot be displayed on this unit. Press TITLE . The mode will change every time the button is pressed. About "Title" and "Text" Title: With this device, it is possible to input the CD/Station name (refer to page 19). [. . . ] · When making connections to the vehicle's electrical system, be aware of the factory installed components (e. g. When connecting the CDA-W560E to the fuse box, make sure the fuse for the intended circuit of the CDA-W560E has the appropriate amperage. · The CDA-W560E uses female RCA-type jacks for connection to other units (e. g. · Be sure to connect the speaker (­) leads to the speaker (­) terminal. [. . . ]